Thread: Sauier 100 Bolt Disassembly

I have a Sauer 100 rifle in 308, every so often I get a misfire, light primer strike on factory ammunition, which I only use. I thought I might disassemble the bolt to see if the firing pin spring is gummed up with grease from the factory.
I can't work out how to unscrew the shroud/firing pin assembly from the bolt body, only 2 notches/positions, cocked and uncocked, similar setup to the Mauser M18, there is a youtube video on it's disassembly but not for the Sauer 100...I thought as both rifles are made in the same company they would be similar but I'm hesitant to try in case I stuff the job.

Has anyone been down this road before? Might have to bite the bullet and take it to a gunsmith otherwise.