Printable View
Doing a short barreled 20 inch version of one of the two
For a general purpose rig,
Looking for a dial up scope for this in mils
Must be 30-34 tube good glass and turrets
Thinking nightforce 2.5-10x42 or 4-16x42 new atacr but heavier etc
Open to suggestions
Cheers
Why 30-34 mil tube?
30 I could maybe understand but noting sensible has a 34mm tube
Sent from my iPhone using Tapatalk
Already have the 30mm optilocks for it, and every dial upQuote:
Originally Posted by BRADS
Scope I've had has been 30mm
Why build a short light rifle and then and put a big heavy scope on it? I've got a Bushnell 6500 2.5-16x42 on mine. It is suppose to be 17oz but is actually 19oz. I wouldn't want any bigger. Options are limited though.
That's why I was looking at the 2.5-10x42 which is betweenQuote:
Originally Posted by stug
19-20 ounces
Vx6 2.5-10-42 would be nice
I put the compact nxs on my 7mm08
http://images.tapatalk-cdn.com/15/05...bccbe8c674.jpg
http://images.tapatalk-cdn.com/15/05...c0c1d9653b.jpg
I think you mean 2-12x42 vx6
Leica ERi 2.5-10x42? Mil turrets, locking elevation turret with zero stop. Capped windage turret. Illuminated centre dot.
I have/had one on my 7mmSAUM. Could do you a package deal...
Thanks mate but I have a sako on the wayQuote:
Originally Posted by The Claw
Bushnell LRHS?
Had it swapped it for the sako:thumbsup:Quote:
Originally Posted by scoped
@7mmsaum how much did that set you back and from where?
They are heavier than a bag of cement.Quote:
Originally Posted by scoped
How does the NXS and vx6 compare glass wise?Quote:
Originally Posted by 7mmsaum
I haven't looked threw any newer nightforce scopes but apparently the glass got a lot better?
The NF is the clearest glass compared to a VX 6, quite noticeable from about 1200yrds onwards.Quote:
Originally Posted by veitnamcam
It's expensive but is really enjoyable to use
Mines the Zerostop model with PTLQuote:
Originally Posted by Nibblet
They retail for $3500 at Dead eye Dicks.
They obvioiusly got a lot better then!Quote:
Originally Posted by 7mmsaum
Yes, seriously nice
From Aussie you would be looking at around $2,200 landed incl GST for one of these. Shop I talked to said that they are sending quite a few over. I wonder why...Quote:
Originally Posted by Nibblet
I was looking at a 4-16x42 ATACR for about $2,900 incl GST landed. $4.3k here...
http://images.tapatalk-cdn.com/15/05...5ba19f68c7.jpg
This is what I'm putting on my 7saum. Was going to do the 4-16 ATACR but couldn't find a nice 34mm mounting solution.
That a 42 or 52 front end?Quote:
Originally Posted by L.R
Sent from my iPhone using Tapatalk
52