Printable View
Right I've run out of elevation on my scope . Got plenty the other way . So to get to 500 I need another 15 clicks a proxy. My scope rings have the plastic inserts ( currently 00) what size insert ,ie -5 +5 and where front back etc pls . It's 1/4 1nch 100
Sent from my SM-J200Y using Tapatalk
-5 at front +5 at back
I should add I've got 23 - clicks
Sent from my SM-J200Y using Tapatalk
Just bang it in a vice and bend the barrel up a bit Munsey. [emoji1303][emoji51]
Work out how much you have the other way and get inserts to suit. If you only go for a small gain now you will no doubt need more after the next session when you want to shoot to 6-800 :D Get inserts to take you as close to the bottom of elevation you can.
This video explains how the Burris inserts work, pretty technical though.
https://www.youtube.com/watch?v=7SCv3FuNUB4
You should have 42 clicksQuote:
Originally Posted by Munsey
Is the zero stop set.?
Sent from my iPhone using Tapatalk
1" or 30mm scope?Quote:
Originally Posted by Munsey
In the front ring put your - insert on the bottom and a + insert on the top. In the back ring + insert on the bottom - insert on the top. If you have greater than -5 +5 inserts, use them. That way you should get your scope operating nearer its optical centre thru the range you wish to shoot. The very worst (unlikely) that could happen is you may have probs getting a 100yd zero (highish) but at least you will have lots of elevation for those 1500yd shots. :)
You can also just add offset inserts to one ring and zeros to the other to only get a small change. In your case though I would put offsets in both rings. Don't forget to very lightly oil the outers of the inserts but obviously don't get any oil on the inner surfaces.
Thanks Sorted . Zero stop set . Im now out to 500 + . Far enough for my ability Or lack off :)Quote:
Originally Posted by BRADS