Printable View
Does anyone know where I can obtain these small screws for Talley Rings ? Either Talley screws or an aftermarket substitute is fine with me as long as it's stainless steel.
Buggered the head on the missing screw in the pic and can't tighten it enough now.
Thanks for any and all help.
https://i.postimg.cc/cJrLh6FR/20230328-184255.jpg
They defo talleys and not warnes mate?
Roger. Definitely Talleys.Quote:
Originally Posted by Kelton
Look under the bottom screws. It's very faint but there is a Talley stamp there.
I see mate call gunworks Canterbury mate
if you can find out if they are metric or imperial, pitch and length.
I'm sure either Bolt Shop (there is one in Wiri) or Anzor will have them,
There is a min $ purchase but I don't know what it is.
Else I would try, GC or Reloader, both really helpful in my experience.
Any retailer that sells Talleys rings "should" be able to get them whether they will get them will depend if they can be bothered if they don't have spares in stock.
I recently bought a new set of Talleys and one of the screws stripped when I screwed it into the reciever (only nipped it hand tight as I was using an alignment bar) infact it never even nipped up it just stripped so was definitely defective. Rang the retailer (Gunworks) and was told they could supply a replacement, so I burgled 1 out of another set I'm not currently using and will grab a replacement next time I'm passing by.