@jono7 Who fitted and bedded the stock for you, or was it finished when you got it? I have one but its in the raw. Needs to be coated, bedded and a recoil pad fitted. Light as a feather.Quote:
Originally Posted by jono7
Printable View
@jono7 Who fitted and bedded the stock for you, or was it finished when you got it? I have one but its in the raw. Needs to be coated, bedded and a recoil pad fitted. Light as a feather.Quote:
Originally Posted by jono7
I shoot a 16" 243 mossberg patriot, i shoot a 85gr sierra flat base varminter at 3020fps with 2209, verified with labradar. I stabilised the forend with epoxy, then i installed 2 qd cups to make it nicer to carry. These little mossbergs are really very accurate, every bit as much as my tikka and howas. I used to have s 308 mossberg as well but sold it as i use the 243 now. At 10-20 yards these 85gr varminters still go clean through a red hind, adnd they generally drop in the spot with my preferred high shoulder shots.
Attachment 137343
Attachment 137344
Looks handy mate:thumbsup:
Looks good, I take it that the cheek riser is home made? Have you got a recipe for how you did it?
7mm saum - lost around 200fps with the chop from 22"Quote:
Originally Posted by superdiver
Rifle was near new and original when I got it, got the hi-tech new/not painted but had the pad already on it(1"). I auto bogged the holes/sanded and painted with etch prime and 2 pack auto paint flat black - Paint shop mixed me up 500ml. Kevin Gaskell did the bedding.Quote:
Originally Posted by Tahr
Great stock, shame cant get them in fibreglass anymore that I know of, want one for my 7mm Practical
Cheers
I just cut some foam from a yoga mat and then wrapped the foam strips in a horse bandage. Same stuff camo tape is made of
CZ 527 6.5 Grendel 14.5" barrel
https://i.ibb.co/6R3N1rN/20180510-150008.jpg
What are the specs on this? Not normally into chassis but that looks pretty sweet. Is it very heavy?
https://www.nzhuntingandshooting.co....rweight-44553/Quote:
Originally Posted by JonP
WTF,? Where do you find these short deer pigs and goats and why after 12 pages there isn't one pic of them ? Do you have other guns for tall deer and goats?
i see a lot of "short deer" hanging up in the chiller. There legs are usually short compared to the rest of them :DQuote:
Originally Posted by sneeze
Ah.. so the short guns are so they will fit through the chiller door. Got it :thumbsup:Quote:
Originally Posted by mikee
OR are used by hobbits, gnomes and pixies?:DQuote:
Originally Posted by sneeze
I can't speak for the hobbits and gnomes, but can confirm that pixies do indeed use short rifles (refer to page 11 of this thread) :thumbsup:Quote:
Originally Posted by Finnwolf
Yep..if you use a long or shall we say tall gun then the bullets go over the top of the short deer!!Quote:
Originally Posted by sneeze
