Thread: Show me your lightweight rifle

Originally Posted by Preacher

As a side note, what is the best way to cut and sand jandals? Worth knocking up a hot wire?

Cut them close to the right shape and tape off your rifle butt with masking tape, going right to the edge of the butt. Glue jandal on with a decent epoxy and wait for it to set hard. then grind jandal just the same as a normal butt pad, on a shearing grinder or a circular sanding disc, or a belt sander clamped in to the vice. And carefully sand away ensuring you follow the 'lines" of the stock. Stop sanding as soon as touch the masking tape. Easy peasy, works great.