Printable View
Any of u guys have any experience with the Stirling model 20
A mate has just bought one and its cycling like shit was told it has a new mag ( does look new ) and is grabbing the rim and causing it to not load rite but also apears to not be ejecting the used shell properly either mite get 2 or 3 shots thru then jams
Trick is to keep them clean. My one needs stripping every 200rnds or so or I start having cycling issues. Mine is also quite fussy only cycling with CCI or Winchester subs any other brands are hopeless.
Cool cheers wsm easy enough to pull apart and put back together? Don't have a lot of experience with the semi was using cci in it last night put one mag thru with a number of jam ups
Yeh mate pretty straight forward, just make sure the bolt is forward before you unscrew the rear cap or your spring might shoot out.
I just lay every thing on an old towel in the order I take it apart and then re-assemble in the reverse order.
Also I've found that my mag seems to feed better if I only put 9rnds in it.
Cheers man
I think Ive got one of these & from memory mine feeds better if you fit the mag & then pull it down so it's hard against the release catch.
Sweet philipo will give it a go
It's been striped and put back together now so will see how it goes
they usually don't like to much lube in them either
Dundee has a very well used one I believe and the accuracy and reliababilty is awesome
mine was the same it would shoot any kind of ammo really wellQuote:
Originally Posted by Gapped axe
Yeah my old girl scraps every round it chambers but shoots mint.
finally took it out last night after striping it and cleaning it etc is shooting reasonably well with a newbie behind the scope took a bit to get on the mark but got there in the end 5 shots in about the old 50c piece so good enough still jamming all the time so given it to someone with a lot more experience hopefully he can get it to cycle better.
My old one cycled fine after I accidentally dropped the magazine and bent the lips a bit. :thumbsup:
might be dirty as fuck from my experance of them becouse there not the easyest to take apart pepole dont bother
A friend of the family had one his two sons put enough threw it to turn it full auto
If ya youtube it it will show ya the tricks to get the bolt and firing back in to the action.Quote:
Originally Posted by rambo-6mmrem
Got to hold ya tounge right but peice of piss once ya done it a couple of times.
Sent from my GT-I9505 using Tapatalk
Yes you tube was a big help when I did take it apart and reassemble it. I would say it possibly had never been apart before I done it was pretty dirty inside to be honest I think the mag might need a little work and that's causing the jams was told it had a new mag when I got it but seems to be catching and flicking the round up most we got was 3 rounds before it jammed but has been jamming almost every round but anyways will see how it goes once I get it back
Anyone have or know were
I can get some original springs seems the problem
the springs have been changed at some point with ones that aren't doing what they need to properly