Thread: Stock Doctor

I have a small split in my SKB rear stock that I suspect is from wood drying out that I would like to get addressed.

It was suggested that I contact the Stock Dr but I can't find any details to get in contact with them.

Anyone know if they are still operating and how to contact them?

Thanks

pretty sure he's long gone, heard great results from him but that was years ago.

post a pic of the stock, some clever buggas on the forum

Kevin Gaskill is retired from stock building. Last time I spoke to him he was still doing small stuff, modifications etc. but that was a couple years ago.


Sent from my iPhone using Tapatalk

I have see Kevin a few months ago. He is out of the game and not interested to get back into it from what I understand.Alan Carr would be you next best bet.

Originally Posted by Friwi

I have see Kevin a few months ago. He is out of the game and not interested to get back into it from what I understand.Alan Carr would be you next best bet.

Allen Carr hasn't done stock work for years.

glue and clamp???? and if its drying out...oil the jolly thing.

@Hunter_Nick is stock making, his work is A1.
Luckily for us he is in our neighbourhood.

Originally Posted by -BW-

@Hunter_Nick is stock making, his work is A1.
Luckily for us he is in our neighbourhood.

Unfortunately no longer in the stock making game. Turns out that a dealers license is required, and that’s too much admin for what it’s worth. Shame really, but it is what it is….

Originally Posted by Hunter_Nick

Unfortunately no longer in the stock making game. Turns out that a dealers license is required, and that’s too much admin for what it’s worth. Shame really, but it is what it is….

That is a real shame.

Originally Posted by Hunter_Nick

Unfortunately no longer in the stock making game. Turns out that a dealers license is required, and that’s too much admin for what it’s worth. Shame really, but it is what it is….

Sorry to hear this Hunter_Nick. A shame your talent can't be available to those who are in need.

Originally Posted by Hunter_Nick

Unfortunately no longer in the stock making game. Turns out that a dealers license is required, and that’s too much admin for what it’s worth. Shame really, but it is what it is….

A real shame. Nothing stopping you carrying on as a hobby, as long as you don't make a business out of it....

Section 5 of the Arms Act is a very broad catch all for repair and manufacture of arms items as a business activity that's for sure! It's a weird piece of legislation that the activity themselves are not prohibited at all just making money doing so.
https://www.legislation.govt.nz/act/....html#DLM72687

Because I like the odd deep dive into legislation I've found a bit confusing that while you require a dealers licence to repair and modify arms items as a business these activities don't seem to show up anywhere in the offences under the arms act while manufacture does.
The offences under the Arms act are Section 42-59 with Section 55 (1)(c)&(d) being the most relevant.

A lawyer might be able to clarify what the situation is there but from a layman's perspective it seems to be a weird legal limbo of not being compliant with the act but there is no offence you can be charged with?

Originally Posted by Makros

A real shame. Nothing stopping you carrying on as a hobby, as long as you don't make a business out of it....

Section 5 of the Arms Act is a very broad catch all for repair and manufacture of arms items as a business activity that's for sure! It's a weird piece of legislation that the activity themselves are not prohibited at all just making money doing so.
https://www.legislation.govt.nz/act/....html#DLM72687

Because I like the odd deep dive into legislation I've found a bit confusing that while you require a dealers licence to repair and modify arms items as a business these activities don't seem to show up anywhere in the offences under the arms act while manufacture does.
The offences under the Arms act are Section 42-59 with Section 55 (1)(c)&(d) being the most relevant.

A lawyer might be able to clarify what the situation is there but from a layman's perspective it seems to be a weird legal limbo of not being compliant with the act but there is no offence you can be charged with?

Consequence of people with no specific knowledge making up legislation quickly and not listening to the submissions most likely. It ends up with piss poor legislation that then needs to be redone and corrected at huge cost and runctions in the affected industries - not just a firearms thing unfortunately.

As far as the stock repair, a very thin epoxy (specialist product like one of the timber coating/sealing epoxies that is thinner than water) and mix it with sawdust scraped of a matching piece of timber or somewhere you can't see on the piece of timber that needs repair. Masking tape each side of the crack, spread the crack slightly and prepare the epoxy. Mix the sawdust in to a thin paste and push it into the crack with a plastic spatula or flexible scraper - not a putty knife as you risk marking the wood surface. You can force a suprising amount of material into the gap using this technique, and the wood surface on each side of the crack will absorb and bond with the epoxy never to split again. It probably isn't likely that you'll get the split clamped correctly without marking the rest of the wood, and this way fills stabilises and colour matches the repair as close as can be done.

PVC glue is not the right product for this, as certain things can make it fall apart and it isn't a tough product being very soft in itself. Another option is one of the superglue type slow drying thin adhesives which you can mix with sawdust but they are bloody difficult to work with (force glue, sticks light to dark) and don't have the working times and workability of the thinned epoxy products.

Edit for afterthought: if the area of wood is oil soaked - this needs to be addressed before any repair attempt as well.

I talked to the central district firearms office, and the (actually quite pleasant firearms enthusiast) on the other end told me that yes, I can make as many as I want for a hobby. I can make for others, but I would have to ‘gift’ them. Any exchange of money = dealers licence.

It’s a tough one, as I’d love to keep the art form alive but I’m not altruistic enough to give away 150 hours of my toil for nothing. I’m contemplating running a workshop tuition series to show others how it’s done.

@Hunter_Nick I guess that would also include checkering. I was contemplating getting a stock of mine checkered when I had the funds to do so. would love to do it myself but not worth the investment in tools for what would most likely be an average result.

Any other recommendations or suggestions? I am in a similar position. It's an SKB as well!