Thread: Sub MOA rifles

now Im not being a smart arse here.....something that was pointed out to me a long time ago and has helped me no end..... you have shot groups of about an inch....and funnily enough your AIMING POINT is about an inch..... if you make it smaller your groups may shrink too...a good way to make it smaller is white spot inside dark outer...so you can quarter the white spot with Xhairs..... try it some time,nothing to loose.
normally I just draw a cross about 1/4" thick.

Originally Posted by Micky Duck

now Im not being a smart arse here.....something that was pointed out to me a long time ago and has helped me no end..... you have shot groups of about an inch....and funnily enough your AIMING POINT is about an inch..... if you make it smaller your groups may shrink too...a good way to make it smaller is white spot inside dark outer...so you can quarter the white spot with Xhairs..... try it some time,nothing to loose.
normally I just draw a cross about 1/4" thick.

If I had more magnification I would but I find that the smallest I can see clearly and quarter with that scope.
Largest 2206h group is .52 inches center to center or 0.4966 MOA ��