Thread: Subsonic project

Originally Posted by shooternz

Only tried a few loads with AP 70 don't have enough to do serious load development with it but 7.0 grains went well
velocity was in the 900fps range,
For full power loads I use 2400, Some of my customers use 21.0 grains of 2205 in their Freedom arms revolvers for Handgun Silhouette
I have seen some impressive shooting at 200 metres with that load velocity out of a 7.5" barrel is over 1200 fps.

Thanks will give those a go,will a light crimp hurt?using them in a tube magazine.