2 questions regarding suppressors
1. Can a suppressor be drilled/bored out to a bigger calibre? Say for example from 6.5 to 30cal
2. Does a OB suppressor need the rear bush fitted when in use?
Thanks
Printable View
2 questions regarding suppressors
1. Can a suppressor be drilled/bored out to a bigger calibre? Say for example from 6.5 to 30cal
2. Does a OB suppressor need the rear bush fitted when in use?
Thanks
yes if done accurately to avoid bullet strike and 100% yes its needed to avoid misalignment is most cases
Who in the Hamilton region can bore out the rear bush and suppressor to a bigger calibre?
Try DPT in Te Rapa, great guys to deal with. DPT Machinists, Unit 11, 706 Te Rapa Road, HamiltonQuote:
Originally Posted by Three O'Three
DPT Machinists - DPT Machinists
Unless you have a mate who can bore it out, selling it and buying a used 30 cal one would be cheaper would it not?
Try DPT first, if that doesn't work give Arthur Cleland (Gunsmith) a call to see if he can help.
Cleland Gunsmithing and Engineering
Got some that work just fine without bushes, unpractical to bore out due to remaining bush would barely be thread depth plus a hair thick overall holding it together.
with a drill bit .2mm bigger than the bullet you are sending at least
wack it in a lathe and get it straight and run it thru and clean up any burrs
there will be a ugly untreated bit of alloy at the end rather than being the coated ali like the rest of the suppressor
if it has a fancy integrated muzzle brake it may need to be taken care around but just dont do it with a drill like i did
it makes a mess. thankfully I was able to hand that suppressor in during the buyback