Thread: Swaro BT question

Originally Posted by ANTSMAN

Im using mil scope and dialling to 450 succesfully- capping my shoot range at 500m-ranging in m and checking incline on app-and inputting into Shooter- was thinking going to Swaro for the lighter scope- dont think ill both now- thank you anyway.

Just get their MOA dial to replace the colour rings or one off trademe.

Originally Posted by Dreamer

Just get their MOA dial to replace the colour rings or one off trademe.

The guy off Trademe is great to deal with. $150 for a custom turret inc freight. I will be buying one as soon as I validate my drop chart.

Originally Posted by kiwijames

The guy off Trademe is great to deal with. $150 for a custom turret inc freight. I will be buying one as soon as I validate my drop chart.

Sounds like the way to go now then!


Sent from my iPhone using Tapatalk

Originally Posted by kiwijames

The guy off Trademe is great to deal with. $150 for a custom turret inc freight. I will be buying one as soon as I validate my drop chart.

Just helped fit one. They don't have the teeth on the inside like the swaro one, you have to trim the lug off one of the rings and push it on. Seemed a little odd but its nicely made.Its relying on an interference fit ,you could put a little glue on it.Working well to date.

Originally Posted by sneeze

Just helped fit one. They don't have the teeth on the inside like the swaro one, you have to trim the lug off one of the rings and push it on. Seemed a little odd but its nicely made.Its relying on an interference fit ,you could put a little glue on it.Working well to date.

The turrets we make do not require glue or even necessarily the interference fit to hold them in place. There is an o-ring on the underside of the Swarovski turret cap that fits on top of the turret. Once you tighten the turret cap down, this o-ring grips onto the turret ring we build and prevents it from spinning on the trimmed down dot ring. By trimming the dot projection off the BT dot rings and fitting our turrets over them, it allows us to have a clean finish on the turret ring and provides more space for data on the turret, particularly with the 2 revolution turrets.

Originally Posted by DaveE

The turrets we make do not require glue or even necessarily the interference fit to hold them in place. There is an o-ring on the underside of the Swarovski turret cap that fits on top of the turret. Once you tighten the turret cap down, this o-ring grips onto the turret ring we build and prevents it from spinning on the trimmed down dot ring. By trimming the dot projection off the BT dot rings and fitting our turrets over them, it allows us to have a clean finish on the turret ring and provides more space for data on the turret, particularly with the 2 revolution turrets.

Are pics possible?
Thanks

Originally Posted by Tahr

Are pics possible?
Thanks

I will try and post some pics on here later on when at computer if it will let me.


Sent from my iPhone using Tapatalk