Thread: Talley rings

Originally Posted by Bill999

they are my go-to these days

do you just stack washers under the scope and then mesaure the stack when you find your perfect height?

Yes. Big round ones of varying thicknesses. Make up little stacks in increments of base height as per the table on the website, measured with the calipers. I use electrical tape to make sure the stack doesn't topple off the receiver, and the scope doesn't topple off the stack, and do it on the carpet just in case. Means I've been able to check the clearance of the objective to the barrel whilst making sure the ocular lens is perfectly positioned for the specific stock's cheek weld. Works well.

Originally Posted by Flyblown

Yes. Big round ones of varying thicknesses. Make up little stacks in increments of base height as per the table on the website, measured with the calipers. I use electrical tape to make sure the stack doesn't topple off the receiver, and the scope doesn't topple off the stack, and do it on the carpet just in case. Means I've been able to check the clearance of the objective to the barrel whilst making sure the ocular lens is perfectly positioned for the specific stock's cheek weld. Works well.

simple and brilliant, heres me using blue tack like an idiot then trying to measure it after removing it haha