Can anybody tell if this barrel looks like it has had a parting tool cut when removed or is this still look like a factory barrel
@kiwigreg https://uploads.tapatalk-cdn.com/201...d5bd2b366c.jpg
Sent from my SM-G900I using Tapatalk
Printable View
Can anybody tell if this barrel looks like it has had a parting tool cut when removed or is this still look like a factory barrel
@kiwigreg https://uploads.tapatalk-cdn.com/201...d5bd2b366c.jpg
Sent from my SM-G900I using Tapatalk
Hard to tell from a picQuote:
Originally Posted by 25/08IMP
What is the thread length ?
Pretty irresponsible if it has been parted off & you weren't told .....
Hope this helps.Quote:
Originally Posted by Kiwi Greg
I don't think he would have.https://uploads.tapatalk-cdn.com/201...3a714f78a6.jpg
Sent from my SM-G900I using Tapatalk
Will have a look tomorrow when I'm at work :)Quote:
Originally Posted by 25/08IMP
Awesome I have sent you an email as well.
Thanks GregSent from my SM-G900I using TapatalkQuote:
Originally Posted by Kiwi Greg
Looks standard length to me, should be 1" from the face to the shoulder.
Has anyone tried screwing a t3 barrel into a sako 75 action? Sorry for the hijack 25/08IMP
That Tikka barrel looks normal to me. Bill999, the newer Sako 75's have a different thread 1.5 than the Tikka's 1.6.
@ohearchai is that the 85 you are refering to?
Do you know at whatyear they started the change?
I'm primed and ready to buy and screw in a different caliber to my sako 75 it will be a shame if the barrel I get doesn't fit
I am unsure what the above means but I thought a T3 is 1”x16tpi and I read that’s what the 75 is but I can’t confirm. I am unsure what an 85 thread detail is but I’d sure like to know also...Quote:
Originally Posted by Bill999
Sent from my iPhone using Tapatalk
@ChrisW another sako question
Sent from my TA-1024 using Tapatalk
I was lead to believe that the Tikkas here in the States anyways, are imperial 1x16tpi, my trg was m27x1.5mm. A friends Sako was m24x1.5mm.
can anyone confirm or deny this tikka/sako 75 barrel interchangeability?
I had a tikka barrel screwed into a sako 85 action and a 308 trg barrel screwed into a tikka 590.
Dont know if that helps
Sent from my SM-G950F using Tapatalk
thanks Andy im gunna take the punt
worst case scenario is id have a shiny stick to grow tomatos up
t3 and sako 85 are interchangeable, but not the older 75
@NZVarminter is that a solid answer mate?
I was ready to pull the trigger up to reading this