Thread: Are Tikka poos?

whyd you let your sheep shit inside?

you should go shit in its paddock for some revenge.

My Tikka just accounted for a bucket load of Aussie 4 legged critters

Originally Posted by Nibblet

Haha nothing but gums

No teeth? Ah, but she could still give you a nasty suck.

Tikka's are fine, but their owners are great to wind up about Tikka's.

Originally Posted by 300winmag

My Tikka just accounted for a bucket load of Aussie 4 legged critters

A bucket of Cane toads ?

luv my Tikka 308, also have a 270 Midland not so keen on that. Probably the maker and not the calibre. All thought I'm not a fan of a big bang.

By crikey @Toby ya cheeky shit I will be second in line from rushy to give you that nipple twist when we get a chance to catch up with ya

Originally Posted by Gapped axe

also have a 270 Midland not so keen on that. Probably the maker and not the calibre. All thought I'm not a fan of a big bang.

Wow, Found one
I had a Midland 270 when I was a young fella, couldn't hit shit with it.
All this time I simply assumed they stopped making them after they made the one they sold me because they were crap , but no, it seems they must have made two.

agreed

Originally Posted by Gerbs

*defends the mighty 270 against the smarmy 7mm wankers*

Something the .270 haters either choose to forget ( or didn't know in the first place!), is that the MIGHTY .270 is in fact the only true 7mm! the smarmy 7mm label mob pretend to be, but they are a bit fat, the next size up, a bit like the fat chick wearing a size down to try and fool ya.......

Originally Posted by Kiwi Sapper

No teeth? Ah, but she could still give you a nasty suck.

A hungry calf is worse!

Quick question, why call it a .270 if its .277 or a .303 if its .311? you get the drift

Toby,
Tikka's are only pooze to people who don't own them, i don't own one yet so...................................

270,Mouse gun

Originally Posted by Toby

Quick question, why call it a .270 if its .277 or a .303 if its .311? you get the drift

Tobes, the generic calibre size usually refers to the BORE size, not the diameter of the grooves. 7mm cal is 7mm because the bore size (measured with a bore pilot bushing) is usually 0.275" to 0.277" (7mm) whereas the groove diameter is nominally 0.284". The bullets are usually sized to match this larger diameter.

Same thing with 6.5cal. The bore size is 0.255" to 0.256" (6.5mm) and the groove diameter is 0.264" .

Does that explain it ok?

D.