Thread: Tikka reaming?

Hi and sorry if I’m in the wrong spot, any ideas who will ream out a Tikka barrel?

Originally Posted by Danny

Hi and sorry if I’m in the wrong spot, any ideas who will ream out a Tikka barrel?

gun works man

Sent from my SM-G960F using Tapatalk

Thanks mate


Sent from my iPad using Tapatalk

+1 for gunworks had a mate that's done a couple through them

As long as it's a reasonable amount being reamed out Gunworks are it. I wanted to just improve a chamber once and they couldn't be sure of a clean cut due to the hardness make up of the barrels and basically advised they weren't keen on that job.

Sent from my SM-A530F using Tapatalk

Originally Posted by Mathias

As long as it's a reasonable amount being reamed out Gunworks are it. I wanted to just improve a chamber once and they couldn't be sure of a clean cut due to the hardness make up of the barrels and basically advised they weren't keen on that job.

Sent from my SM-A530F using Tapatalk

Makes sense, a small cut can be worse on gear and less room for error (nice finish).
I’d prefer standard but hard to find a standard in the best couple of calibres atm.


Sent from my iPhone using Tapatalk

Could try Hugh Bradley at Bradley Barrels gunmakers.nz@gmail.com, done all my barrels and is very good...never hurts to ask.