Thread: Tikka T3 Scope Rings issues

Yes it is cerakoted but was blued gun,don't like anything shinny on a gun so got it done. I've had same issues with my t3 as you where as the groups had a spray pattern on the target but since I was using the setup as per picture there was no way it could have been the scope ,mine was a plastic stock by the way and just in front of the action on both sides inside the barrel channel there are small lugs that I removed with a knife and BINGO gun was submoa!
Is yours plastic or wood?

My is "plastic" but I have 4 Tikka's with the synthetic stock and I only have "problem" with this one.
Once again, I will "re-double" check everything and see what to do next.
Thank you A LOT for all the feedback's.

Mac

Originally Posted by PERRISCICABA

My is "plastic" but I have 4 Tikka's with the synthetic stock and I only have "problem" with this one.
Once again, I will "re-double" check everything and see what to do next.
Thank you A LOT for all the feedback's.

Mac

Mac I know what you mean,I've had 6 over the years trying different calibers etc and the 7-08 as pictured was the only one that was dicking me around but like I said after asking the right questions on this forum I took on board all that was suggested, found the problem and fixed it on the range DEAD IS BETTER was my wittnes.

@mayfly, I am "new" in this forum and "new" on hunting and shooting too(2years) but I have learned a lot during these two years. Joining this forum I learn A LOT more and whit people like you and many other I "meet" in here I am sure I will learn HEAPS more.
Thank you a lot for the advise, I will have a look n the stock and also follow the instructions from Vietnancam on how to set things up.

Thank you once again.

Mac