Printable View
Looking at getting a Sunwayfoto tripod. They seem to get good reviews online.
Question is how do you guys find the saddle adaptor vs clipping straight into the arca / pic rail ?
I’d like to run a few rifles though the tripod and wondering if it’s better to chuck rails on all the rifles. Obviously more expensive and not super keen to drill into my carbon stock. Or will using the sm-76 saddle adapter should do the job just fine ?
What are you guys doing ?
Sent from my iPhone using Tapatalk
Have a look at"manbily MA-284GL"
Saddles suck. Get rails.
I run ARCA rails on most of my rifles but have a saddle on an arca for the guns that dont require one.
This is mainly the wee 223 and 204, I do this so the kids can shoot from the sitting / kneeling and standing positions which they often prefer on uneven ground.
I'd reccomend the BOG tripods, the Deathgrip infinite comes with a saddle and is ARCA compatible.
YMMV
I just finished decorating the tripod for PRS matches. I would prefer arca interface as you can put not just rifle, but also 100 other gadgets that has arca interface,
Bino
Attachment 269492
Scope
Attachment 269493
Garmin
Attachment 269494
I have glued an arca rail on carbon stock for a mate...with a flexible glue that is relatively easy to remove...we tested it hard in the shop and its been working over a year now.Quote:
Originally Posted by MPR
https://www.glueguru.co.nz/shop/BRAN...artridges.html
Here's a link to the plate that replaces one on a tripod head, and can take both Picatinny and Arca fittings. Caveat - you need to make sure it will fit the tripod head you currently have some aren't universal.
https://a.aliexpress.com/_mqRmwjt
These are a nice way to attach the tripod to your gun.
https://www.mtngear.nz/products/hybrid-rail
If possible I’d only use a saddle as a last resort.
I totally get that! The SM-76 saddle adapter should work well for most setups, but having rails on your rifles could make it easier to swap between them. Just weigh the cost vs. convenience—do what feels right for your gear!
Picked up a sunwayfoto and the sm saddle.
Been very impressed ! It’s bean easy mounting the chronograph, spotting scope, thermal and rifle
Sent from my iPhone using Tapatalk
Don't buy the poor man's Chinese knock-offs. Get the real deal (Really Right Stuff)
Attachment 271507
I have found clipping straight onto pic rail really good. Had no issues at all, good solid connection and easy to carry whole setup over shoulder.
Attachment 271527
Tried most of the mounting options and tripod sizes and settled on a tripod with a 75mm bowl, and a leveling head that accepts both Arca and picatinny.
Sits a lot lower than a ball head so improves on stability, and has less knobs and moving parts than most ball heads (the sunwayfoto inverted ball head is an exception to the rule). It is however limited in it's vertical adjustment, so at extreme up/down shooting you would need to adjust the front leg of the tripod.
Mate runs the same tripod and leveling head but with a saddle mount, and the difference in stability between the 2 is very noticeable. Saddle definitely has more wiggle and has on occasion allowed the rifle to fall out when being carried over the shoulder.
As for messing up your rifle by screwing in a mount - I just bit the bullet and did it. My rifles are to be used, so it made sense to do whatever was required to make them useable.
