Thread: Vx3 zero stop mod any tips or advice ?

Originally Posted by Mathias

Ring NZ Asia in Nelson and see if they will send you the correct ball bearing. Install it into that hole firmly seated and then try it out. The zero stop ring installed on your scope can be moved if required. One edge of the stop on the ring should line up with the white line on the scope, sorry cant remember if its the left or right edge. The hole in the cap is in the correct place.

Good to know it can be moved if required that would mess with my ocd if zero wasn't zero
Thank you @Mathias I know this has been asked before just needed it simplified for my brain.