Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Ammo Direct Terminator


User Tag List

+ Reply to Thread
Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 39
Like Tree51Likes

Thread: What Scope are People Using for Medium Range

  1. #16
    Member
    Join Date
    Apr 2017
    Location
    Marlborough - Pelorus Sound
    Posts
    5,455
    [QUOTE=GWH;1251869]Each to their own i guess, but for me when shooting deer at 500 yards or more i like to have every bit of precision I can


    I personally think any hunter (if I can use that term)
    That makes a decision to take an animal needs to consider the animal also

    To attempt a "clean Kill" shot at 400 - 500m + meters is not called for - IMO
    Yes - it appears to be the fad of late on U-Tuber's etc
    But they will never show the F - ups
    Even if a slight back in gut shot is retrieved and dispatched - what timeframe to get to it and find it ???

    No
    Just walk a bit closer ah
    Want to be a Sniper - go join that brigade in Middle East
    mikee and Ned like this.

  2. #17
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,822
    bog std 3x9x40-50mm it is what has worked for me for years,the fixed 4x is awesome scope and comes up very well BUT even I have to admit the 3x bottom end slightly edges it for field of view up close...not by much but it is there.I can count on one hand the deer Ive shot past 300 yards..but all have dropped to single shot.

  3. #18
    Member
    Join Date
    May 2015
    Location
    Rolleston
    Posts
    559
    Quote Originally Posted by GWH View Post
    Each to their own i guess, but for me when shooting deer at 500 yards or more i like to have every bit of precision I can, that means a reasonable amount of magnification, and I like to dial the elevation turret to allow for the drop.

    Trying to use holdover subtentions at 500 yards is just too vague for me. You are always guessing trying to hold halfway between two hash marks etc, then you have the confusion in the heat of the moment about which hash mark you are supposed to be holding on, it's just too messy for my liking. Dialing for distance really isnt that hard to setup and perform, when shooting at that distance you normally have well enough time to range, check dope chart or Ballistic app and dial the correction onto the turret and then hold the cross hair where you want to hit, either holding or dialing on a wind correction as well.

    Trying to hold over for elevation and hold off for wind at the same time is just double messy.

    The red yearling I shot at 597 yards on Friday evening, i had my scope wound up to the max of 20x and even thou the ret has a lovely little fine floating dot in the centre, i tell ya what the animal is still fairly small in the scope. I use to use a 16x scope on the 7mm Saum, and that extra mag up to 20x sure helps place that crosshair where you want it when out around 500 yd plus.

    This is what I have found to work very well for me anyway.

    I quite like the Sightron S-Tac 4-20 that im running on my 7mm SAUM, fantastic value/performance for the money. So much so that i have another two of them in transit. CameraLand NY have them on special currently for USD $299.99 each. Crazy cheap.

    My father inlaw runs a couple of these on his rifles that he's competing in 1000 Target shooting with and hes right up there with the top shooters with gear that's worth WAY more.

    If you think 4-20x50 is too much scope, they are also doing the 4-16x42 S-tac at the same price. It has the MOA-3 ret, so subtentions in moa which you can use to hold over with on the closer stuff and maybe dial for the longer stuff. These scope dial rock solid.

    https://cameralandny.com/shop/sightr...iation=3072538

    They also do a FFP S-Tac in 4-16 with mil ret, but its a little more $, but not much more.
    Trying to order from camerlandny at the moment but having issues with their website and getting it to accept my card. Any clues appreciated!

  4. #19
    Member
    Join Date
    Sep 2020
    Location
    wairoa
    Posts
    471
    In my little experience I have found a ffp scope rubbish for everyday hunting unless you are shooting past 100m all the time. The crosshsirs are too fine for me to see.
    ishoot10s, GWH and mikee like this.

  5. #20
    GWH
    GWH is offline
    Member
    Join Date
    Jul 2012
    Location
    Napier, Hawkes Bay
    Posts
    4,460
    [QUOTE=Sarvo;1251953]
    Quote Originally Posted by GWH View Post
    Each to their own i guess, but for me when shooting deer at 500 yards or more i like to have every bit of precision I can


    I personally think any hunter (if I can use that term)
    That makes a decision to take an animal needs to consider the animal also

    To attempt a "clean Kill" shot at 400 - 500m + meters is not called for - IMO
    Yes - it appears to be the fad of late on U-Tuber's etc
    But they will never show the F - ups
    Even if a slight back in gut shot is retrieved and dispatched - what timeframe to get to it and find it ???

    No
    Just walk a bit closer ah
    Want to be a Sniper - go join that brigade in Middle East
    The original poster asked about scopes for shooting deer to a max range of 500m, and was talking about using holdover marks on a reticle to do that - Hence my reply talking about shooting deer at that kind of distance.

    He didn't ask for info on scopes for shooting deer at short ranges in the bush, yet most of the answers/recommendations he's getting are more suited to that in my opinion.

    Too many people 'talk' about shooting animals at these types of extended ranges, when in reality they cannot even hit a 500mm x 500mm steel plate at 300 yards. I've lost count of the number of times I've witnessed guys trying to shoot my gongs at the range.

    Once you go beyond the PBR of any centrefire, so many people have no idea what the trajectory/drop is doing. Accurately hitting something at 400 to 500 yards is a lot harder than many 'normal hunters' think it is. In reality, if you have a good understanding of trajectory and how to use even average gear, the elevation drop side of it really isn't that hard.

    LR hunting may not be for you, thats fine. We all have our choice. I spent plenty of time in the bush shooting deer up close inside 30 yards when i first started. Nowadays, i prefer to sit on a vantage point, let my eyes do the walking so to speak, and I enjoy the science and challenge of making a shot that the average hunter cannot.

    Over the last few years, I've been doing this, I've seen an awful lot more animals and been able to shoot them in places that you would normally struggle too if you had tried to stalk in close to them, ie when you are down in the scrub with them you wouldn't see them, or they would have heard or smelt you coming long before you laid eyes on them. So basically im shooting them in places that you cannot walk closer too.

    As i said eariler 'each to their own'.

  6. #21
    Member
    Join Date
    Sep 2013
    Location
    Wairarapa
    Posts
    1,178
    I wouldn't worry about getting a FFP scope either, with most variable scopes I find in practice that I only ever use the top and bottom end of the range. i.e. for a 3-9 I leave it on 3 when walking and stumbling onto game and push it up to 9 when I see game before the game sees me and I am shooting at distance.

    I can say almost to a certainty that there will never be a time where you are using subtension holdover and a lower setting at the same time. So if you want to use a ballistic reticle it can be RFP and just use it at highest magnification and be done with it.


    As an aside, below is a photo of how I put on a dial chart on the scope on my .22
    Just set the chart up in Excel and make the cell fill colour black, text colour orange,yellow or white. print out the chart (it may take some trial and error to get the cell size and text size right) and cut it out and then put clear sellotape over top of it to hold it in place and keep the weather off it.
    Name:  Dial Up.jpg
Views: 284
Size:  9.9 KB
    Micky Duck likes this.

  7. #22
    Member
    Join Date
    Jun 2012
    Location
    Blenhiem
    Posts
    1,108
    I use a 2.5-10 power SFP for my medium range rifle and serves me well for wind holds on the reticle at max power. Also do like FFP for 100m+ shots if you need pin point accuracy because the reticle finer and a wide field of view on a lower magnification setting, plus the wind holds on the reticle can be used on any magnification which makes things simple.

  8. #23
    Member
    Join Date
    Oct 2013
    Location
    Ohaaki,Taupo
    Posts
    687
    After 3-5k S&B PM2,T96,Z8i,NF ATACR seen the light and use a Leupold 3.5-10 with CDS easy
    fast and light and no herrendous 34mm tube or in excess of 30 ounces. Rifle in my hand not dragging on the ground or slung on back.
    Many deer and the odd pig are not liking the combination this year

  9. #24
    Member
    Join Date
    Jul 2016
    Location
    Loburn, Canterbury
    Posts
    418
    Hi Grandpamac

    I have had a few, spent thousands on Schmidt Bender PMII, Nightforce NXS (nice glass but make better boat anchors)

    I wanted the same as you but found the ffp cross hair was too big at distance and covered the target.

    Average glass at 10 power is half as effective as good glass at 10 power

    I settled on a Leica ERi 2-10x42. Very clear on animals out to 500, it has a very simple elevation turret, and practically light. I have had similar experiences looking through mates Swarovski glass. In my opinion you would need 14+ power in a leupold to get the effective clarity on target as 10x of the Leica or Swarovski.

    Doing the research is half the fun, enjoy the process.

  10. #25
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    3,074
    Greetings and thankyou one and all,
    Your replies have been most useful. I note that a lot of the preferences are for lower power ranges than I was expecting with a lot of votes going for 2.5 to 8 power. Scrambling through thick bush is currently, and will likely remain beyond me but being able to drop down magnification from my 6 and 10 power scopes would be an advantage. Please keep the suggestions coming.
    Many thanks Grandpamac.
    Micky Duck likes this.

  11. #26
    Member
    Join Date
    Feb 2020
    Location
    Scotland
    Posts
    1,214
    Quote Originally Posted by grandpamac View Post
    Greetings and thankyou one and all,
    Your replies have been most useful. I note that a lot of the preferences are for lower power ranges than I was expecting with a lot of votes going for 2.5 to 8 power. Scrambling through thick bush is currently, and will likely remain beyond me but being able to drop down magnification from my 6 and 10 power scopes would be an advantage. Please keep the suggestions coming.
    Many thanks Grandpamac.
    @grandpamac I would take a good look at the Schmidt & Bender 4-16x50 with BDC (names have changed, called 'Precision Hunter'/'Long Range' and 'Varmint' at different times, now just called the 'Klassik'). They are FFP with side focus and usually have either the P3 (Mil-Dot) or A7 (German Post) reticles.

    Downsides are long length, tunnels from 4-6 power (I only ever leave mine down on 6 power and turn up from there) and probably a bit expensive if buying new.

    Plus sides are build quality, good glass clarity and light transmission, reliable yet low profile single turn turret with 0.05mil clicks for super precise adjustments which will get you out to 500m (with a cartridge/rifle combo that has over 3,000 fps at the muzzle) and very good factory service.

    https://www.schmidtundbender.de/en/p...0-klassik.html

  12. #27
    Tread carefully in the suck... ishoot10s's Avatar
    Join Date
    May 2012
    Location
    NW of the true capital...
    Posts
    1,903
    The 2.5-10 NXS with Velocity 600 reticle might suit you. There were three models released, LV MV and HV but I’ve only ever seen MV here. I had one on a 300WM and with a 200m zero, the holdovers were pretty much bang on out to 600. There’s one for sale, unclear if it’s MV.

    https://www.nzhuntingandshooting.co....-scopes-77866/
    10MRT shooters do it 60 times, in two directions and at two speeds.

  13. #28
    Full of shit Ryan_Songhurst's Avatar
    Join Date
    Sep 2015
    Location
    South Island
    Posts
    10,321
    $$$ but I've had a scope or two in the past and this thing just does everything and does it very well. Don't miss the extra mag of a 15x or 18x Leupold etc as the glass is just so much better, was shoulder shooting hares at 400m+ the other evening with longest one being 538m. Mine has the 4A-IF reticle but you can also get them with a ballistic reticle if you want to shoot out far without the turret
    Name:  IMG_20211125_074933.jpg
Views: 553
Size:  6.79 MB
    270 is a harmonic divisor number[1]
    270 is the fourth number that is divisible by its average integer divisor[2]
    270 is a practical number, by the second definition
    The sum of the coprime counts for the first 29 integers is 270
    270 is a sparsely totient number, the largest integer with 72 as its totient
    Given 6 elements, there are 270 square permutations[3]
    10! has 270 divisors
    270 is the smallest positive integer that has divisors ending by digits 1, 2, …, 9.

  14. #29
    Member
    Join Date
    Sep 2017
    Location
    Wellington
    Posts
    1,736
    I love my Nikon Monarch 3, 2-8x35 BDC. I use Strelok for the drops, if I go out for a day I write the major drops on my arm/wrist in sharpie. The only dial setting I use is when switching to subs.

  15. #30
    Member mopheadrob's Avatar
    Join Date
    Jun 2018
    Location
    Christchurch
    Posts
    697
    Far be it from a relative newbie like me to give you advice, but I'm with @GWH and the others who have recommended higher magnification ranges. I remember reading a couple of articles recently advocating for running variable scopes at around 70% of max. I found my old VIII 3.5-10 to be on the low side at longer ranges. Perfect for an all-purpose rig, but if you've got other rifles for this and you're setting this one up for longer ranges then I'd go higher.

    I also personally wouldn't use holdover for anything over 300m - dialling is not difficult and you usually have plenty of time to range, check drops and dial. Something like the CDS system may be a good way to simplify this even more, but personally I want the flexibility to change loads and then you need the charts anyway.

    With the above in mind, I put a Meopta Meopro 6-18 x 50 on my 7mmWSM and I love it. Glass and build quality is fantastic for the price-point. There's one on here for the same price I paid for mine - can't believe no one has snapped it up yet: https://www.nzhuntingandshooting.co....e-scope-77563/ Someone mentioned light-gathering, and this scope is awesome at first & last light. I don't find it too bulky, but then I have a laminate stock so my rifle is pretty heavy anyway and I have the .243 for other situations.
    veitnamcam, GWH and Moa Hunter like this.

 

 

Similar Threads

  1. Shooting at Medium Range
    By grandpamac in forum Shooting
    Replies: 37
    Last Post: 31-05-2021, 07:01 PM
  2. Replies: 15
    Last Post: 21-03-2012, 04:33 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!