Thread: Where is my dream scope?

@Ultimitsu .In answer to your question about 30mmm vs 25 mm. The radius of 30mm is 15mm and the radius of 25m is 12.5m. This puts the centre of the 30mm 2 1/2mm higher. ( about 1/8th inch and is enough to lose cheek weld because the head must be raised to view through the scope. The onky way to achieve a low equivalant mount iS to use a 30mm scipe with objective bell diameter of approx 5mm less than say the 40mm comon to 1" tubes. This is why I found the 32mm acceptable.