Thread: Who owns a hells canyon?

Andy , to get a good flat reference, remove the action from the stock and use the flat part under the action. Or the flats on the side with a square set along them.

The newest x bolt that will come in the country will have a flat reference milled just behind the rear bridge.
And the threads will be more common stuff than the shitty threads currently offered on the thinner barrel models.

Originally Posted by Friwi

Andy , to get a good flat reference, remove the action from the stock and use the flat part under the action. Or the flats on the side with a square set along them.

The newest x bolt that will come in the country will have a flat reference milled just behind the rear bridge.
And the threads will be more common stuff than the shitty threads currently offered on the thinner barrel models.

I tell ya what, it makes you appreciate scoping up a tikka!
I will put a photo up of the model on the box, you might be able to decipher it for me.
There is a small flat section at the back of the bolt that I used as a reference point.
All good to go.
Wasn't that happy with the first few shots but deep cleaned it and quite a bit of carbon and copper come out.
I will be interested to know if they have an accuracy guarantee.
I will be spewing if I need to use one!

Sent from my SM-A226B using Tapatalk