Thread: Who owns a hells canyon?

Originally Posted by Friwi

Andy , to get a good flat reference, remove the action from the stock and use the flat part under the action. Or the flats on the side with a square set along them.

The newest x bolt that will come in the country will have a flat reference milled just behind the rear bridge.
And the threads will be more common stuff than the shitty threads currently offered on the thinner barrel models.

I tell ya what, it makes you appreciate scoping up a tikka!
I will put a photo up of the model on the box, you might be able to decipher it for me.
There is a small flat section at the back of the bolt that I used as a reference point.
All good to go.
Wasn't that happy with the first few shots but deep cleaned it and quite a bit of carbon and copper come out.
I will be interested to know if they have an accuracy guarantee.
I will be spewing if I need to use one!

Sent from my SM-A226B using Tapatalk