Thread: Winchester factory ammo, serious issue

Originally Posted by gundoc

Return the faulty ammo (well photographed and written up) to the retailer in the first instance. Winchester NZ are required to replace the faulty ammo and also make good any loss incurred through its use, provided the ammo is proven to be faulty. Is it possible that there is a burr on the edge of the chamber of the rifle that could have caused the gouge when cycling the rounds through the action? Such ammo faults are not common, and the factories conduct QC checks during production to avoid such things. If a batch has come from US production with those faults then Winchester could be in deep crap, given the sort of damage claims given by US courts.

@gundoc It was the guy at the next bench, I didn't think to get his number or anything, just a couple of relevant pics. The rounds were in that
condition in the packet, the one with bright gouge came out straight out the packet (I picked that one out of the packaging myself), hadn't touched the rifle in any way. I think he was a new shooter as he didn't seem very confident about what was going on. Because he didn't seem very confident, I told him repeatedly to get the rifle checked by a gunsmith as he wasn't sure what to do next. Hopefully the smith he goes to will point him at the supplier and give him some decent advice. There were two deep pin prick-type holes in the bolt face, but couldn't see into the chamber obviously. It was a Mauser 98, so at least it went bang in something nice and strong.

On another note, that work you did on my marlin trigger was excellent, just the job! I'm a very happy chappie.