Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT Ammo Direct


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 18
Like Tree6Likes

Thread: Winchester Re-barrel

  1. #1
    Member
    Join Date
    Sep 2021
    Location
    Manawatu
    Posts
    70

    Winchester Re-barrel

    Hi all.

    I have a winchester mod70 carbine .243 with a tired barrel and a repaired stock (still functional but pistol grip removed and pinned)
    Was wanting to re-barrel to .308, does anyone know of any spare barrels around for these? (on a budget/cant afford a brand new barrel) And someone in the lower north island to fit it.(on a budget/cant afford a brand new barrel)
    I really like the actions on these, but maybe better off just selling it and buying a ready to go second hand rifle?

    Cheers in advance

  2. #2
    Member
    Join Date
    Feb 2014
    Location
    Hawkes Bay
    Posts
    2,602
    There are plenty of tired .308 target barrels lying about that are plenty good enough for a sporter. No problem to shorten them up and rechamber but ideally they could do with slimming down the profile for sporting use.

  3. #3
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    3,070
    Greetings @Bhess,
    Unless you can find a M70 barrel that can just be screwed in selling and buying second hand is probably your best option.
    Regards Grandpamac.

  4. #4
    Member
    Join Date
    Dec 2014
    Location
    canterbury
    Posts
    6,235
    Yes but a lot of those old target barrels are the wrong receiver thread, buggered and 1:16" twist.
    The Church of
    John Browning
    of the Later-Day Shooter

  5. #5
    Member
    Join Date
    Dec 2021
    Location
    Auckland
    Posts
    524
    Been a while since I was looking at this but I think Tikka barrels screw straight onto a winny. Get a lightly used Tikka barrel for under $300. A bit to fit and heads pace.

  6. #6
    Member
    Join Date
    Dec 2014
    Location
    canterbury
    Posts
    6,235
    An M70 carbine is going to be hard to find a ready to fit still good 308 barrel for.

    Lots of 308 barrels are coming off perfectly good rifles for new 6.5s
    But usually from a more modern action that is easy to get go fast bits for
    The Church of
    John Browning
    of the Later-Day Shooter

  7. #7
    Member
    Join Date
    Feb 2014
    Location
    Hawkes Bay
    Posts
    2,602
    Quote Originally Posted by akaroa1 View Post
    Yes but a lot of those old target barrels are the wrong receiver thread, buggered and 1:16" twist.
    They will be the wrong thread but many are not at all buggered once you cut 6-8" off their 30". It's the first ~4" that is shot out. As for twist, most will be 13-14 twist so will stabilise up to a 165 roughly.

  8. #8
    Member
    Join Date
    Oct 2014
    Location
    Napier
    Posts
    1,149
    Give Mike Collings a ring in Whakatane 0212605211

  9. #9
    Member
    Join Date
    Dec 2021
    Location
    Auckland
    Posts
    524
    A Tikka barrel will sort it

  10. #10
    Member
    Join Date
    Dec 2021
    Location
    Auckland
    Posts
    524
    https://en.wikipedia.org/wiki/Barrel_threads

    Tikka and a few sakos have same thread and tenon diameter. They're a bit longer than the winny tenon. (machine to fit)
    Ruger fits as well. I had a Tikka barrel fitted to a tang safety ruger to keep it going.
    Last edited by Longrun; 17-07-2023 at 04:08 PM.

  11. #11
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    3,070
    Greetings again,
    Plenty of suggestions. Only you @Bhess can sort out what is right for you. It probably comes down to what options you have in the gun safe. If there are plenty great but if the safe contents are sparse you may not want to have the rifle gathering dust in a gun smiths racks during spring and early summer. Fitting a Tikka barrel is beyond just screwing it in and may involve re cutting the chamber, something some smiths are loath to do in the hard Tikka barrels. The cost of even a SH barrel plus fitting will likely be not far short of that of a second hand rifle so an option might be to pick up one of the latter and park the M70 (which you like) in the back of the safe until funds permit rebarreling. You have choice.
    Regards Grandpamac.
    PS some of my rifles have had extensive periods of safe curing (sitting in the back of the safe waiting) without ill effects.

  12. #12
    Member
    Join Date
    Dec 2021
    Location
    Auckland
    Posts
    524
    No, just trimming the tenon length re: Tikka barrel

  13. #13
    Full of shit Ryan_Songhurst's Avatar
    Join Date
    Sep 2015
    Location
    South Island
    Posts
    10,312
    Quote Originally Posted by Longrun View Post
    Been a while since I was looking at this but I think Tikka barrels screw straight onto a winny. Get a lightly used Tikka barrel for under $300. A bit to fit and heads pace.
    Must be something there as I've seen several M70s for sale at various times with Tikka barrels
    270 is a harmonic divisor number[1]
    270 is the fourth number that is divisible by its average integer divisor[2]
    270 is a practical number, by the second definition
    The sum of the coprime counts for the first 29 integers is 270
    270 is a sparsely totient number, the largest integer with 72 as its totient
    Given 6 elements, there are 270 square permutations[3]
    10! has 270 divisors
    270 is the smallest positive integer that has divisors ending by digits 1, 2, …, 9.

  14. #14
    Member
    Join Date
    Sep 2021
    Location
    Manawatu
    Posts
    70
    Thanks for the advice everyone. And to those that messaged, will give it some thought and will post if I head down the re-barrel route
    Micky Duck likes this.

  15. #15
    Member
    Join Date
    Jun 2023
    Location
    waimakau
    Posts
    3,635
    there was a guy at auck arms fair a couple of weeks ago with a brand new 243 barrel for 300$. I would of bought it for wifes rifle to downsize cal but bought a little used ph 243 instead
    Micky Duck likes this.

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!