Thread: windage adjustabe rings

couple of things to check before buying something.

are any of the holes in the bases enlarged ? maybe the base has been screwed down slightly out of place ?
have you confirmed that you have the full amount of windage travel as per the specs for this particular scope model ?
what happens when you slightly loosen the screws on the rings (the screws/bolts holding the ring on the base) ?
are both rings mounted in the same orientation (bolt on same side) ?
try mounting the rings turned 180 degrees (bolt coming in from other side)

if you still have a problem, burris signature zee rings can be used to adjust both elevation and/or windage issues, just rotate to "fat" part of the insert 90 degrees.

good luck, be interested to hear what the problem turn out to be.