Rtfm?
Printable View
Rtfm?
Re tighten fukn mounts?Quote:
Originally Posted by Gibo
Sent from my iPhone using Tapatalk
oisn
Ttbfg
Sent from my iPhone using Tapatalk
don't be a rude prick!
Rtfm read the farken manual
It's something you only do after you try ten times, ten different ways.Quote:
Originally Posted by veitnamcam
I'm ready the zee ring booklet and it actually suggests what ebf initially said. Put inserts on 45 degree to get some back. I'll be farked :D
Christ on a tricycle, it's a miracle... !
He read the manual :thumbsup:
While that may fix it I guess this is sort of a band aid cure misaligning the inserts to correct some other misalignment?
My thoughts too VC. Might check out the rail etc
Sell it dale still has that sako......Quote:
Originally Posted by Gibo
Sent from my iPhone using Tapatalk
The Remingtons have that problem the screw holes are on the piss I have 5 700's none are any use with rails I have tried a few rails not cheap Chinese junk, expensive US made stuff none were of much use, I have fixed the problem
by fitting them with Leupold or Burris bases and ring sets with windage adjustment a couple have Burris signature Z rings probably your best bet is the Burris Z rings I find them most helpful just turn the insert to jack the scope to were it needs to be get a good selection of inserts and you can sort it out quite easy,
just wait till your at the hut and grab someone elses there should be plenty to choose from :thumbsup:
Hey Gibo, have you tried "leaning" the other way when you are shooting!!