Printable View
Looking into buying a wsm xbolt for a bit more down range punch that my 708 is lacking.
My thoughts are 270wsm running 145eldx - 150lrab or 300wsm running 178eldx - 190lrab
Any of you lads running xbolts with either of these combos have any advise?
Mag length or Barrel twist issues etc
Intended use is 50/50 long rang gong gun and hill top glassing gun, 22ish inch and suppressed
@Tahr
I have the 270wsm at 21.67 inches. Running 150 NBT at 3095. AR2217. When they run out I'll go to eldx. I wouldn't go any shorter. Suppress it and it doesn't kick too bad. I load to mag length, no issues. It does everything I've thrown at it so far. Vx5 on top it's a good reasonably light all rounder.
Not sure about the 300wsm, but I know of a winmag and it's a dog. Maybe too light for the caliber especially at 26 inches.
I also have the 708 running 150 eldx. Not sure the wsm has much advantage especially if you're ranging and dialing but I like the xbolt more than the cheap r700 that groups about 2 of 3 inches after I took it hunting in the rain for a while and let the rot set in.
I’ve got a 270wsm x bolt. Trimmed to 22”. I think it’s a great combination. I put a replacement trigger spring into it and that improved it no end. 270wsm is an easy case to work with and mine has worked with every bullet I’ve tried. I’ve found it mild to shoot suppressed and tolerable un suppressed. It’s also extremely accurate.