Thread: Zero stop

I reckon you won't really notice the weight difference.Nothing wrong with either options, the price difference is significant between the Mk4 & VX3! I'd go the 50mm.

The mark 4 would be built stronger and have better dials wouln't it or not?

Hi Yogi, I have a Leupold VX6 3-18x50. I consider it to be the best scope I have owned to "look through". I put a CDS turret ( simply a MOA one not linked to any load so I could determine the drop adjustment for myself, and its simply brilliant on my 6.5x55 out to about 600 yards. Its accurate but 600 is probably morally too far to shoot a deer; 400 better max for the 6.5x55 IMO ) BUT it hasn't got a turret that moves "up and Down" externally to show you a verner with lines on it for each turn so I got a zero stop addition from Leupold. What a heap of afterthought crap! Have to glue the little ring inside the CDS dial with two sided tape ....lasted about two days so I glued it in place with epoxy....have to be very neat and don't use too much. It now works fine if the CDS turret does not come loose!. There are 3 little grub screws that hold it on to a "post" which does the adjustment. The post is barely 9mm in diameter and isn't large enough to fully support the CDS in the field...it comes loose ! Quite frankly it is a very cheap afterthought and not up to the standard of other scopes of the same price. A mate has a VXR , the turrets are higher but at least it doesn't need a zero stop as it has the one turn height lines so you can tell which turn your on....I like that better in the absence of a proper zero stop.

Your mate Vxr, is it the patrol 3-9x40?

Leupold 3-9x40 VX-R Patrol 30mm Riflescope

Hi Friwi, my mistake...its a Mk4 -

Hello!
It is only my 50 cents. IMO zero stop turrets are important for those who shot "tactical" mutiple targets in different long range scenarios and need a "quick and easy" return to zero. Fair enough if you "kind of lazy" or too busy to work out your tactical turrets zero. Another option in scope are the Vortex Viper HS and PST, the HS has the "basic" model with covered turrets but fully marked and designed to be dialed if you wish, all of those scopes line have a system where you adjust the "almost" zero stop with "chins"( I am sorry but not sure if it is how spell), the little things are placed inside of the turret system in a way where you can not go past a full revolutions bellow your zero if you set properly. So, this means, every time you coming back down to you zero you may go past it but, never a full rotation so you can just go up few clicks and you "sorted". Many people think the turrets are to high but as you "learn" how to work and carry your rifle and scope you will just love it. IMO the glass is great and the eye relieve is too thought.
Check Vortex website or YouTube about Vortex Viper HS and variations and Viper PST.

Hope it give another perspective and option.

Please, no offence to those like me who has a "kind of" zero stop or full zero stop turrets ether those who are looking for these options.