Thread: 2008 ranger 2wd front wheel bearings help

Hello out there can someone tell me how to get into the hub to get to the bearings thanks

https://www.youtube.com/watch?v=Fiz53KIMjMQ

Originally Posted by veitnamcam

https://www.youtube.com/watch?v=Fiz53KIMjMQ

Thanks but when you take the wheel off it looks nothing like that

ah ok.

no cap on it at all?

Originally Posted by veitnamcam

ah ok.

no cap on it at all?

No mate it is flat with raised steel lugs maybe you put a bar across them undo, nut under that maybe googled it but havnt seen anything that looks like mine cheers

most modern utes have a complete hub unit that bolts in from the back,you cannot get to the bearings as such, you replace the hub unit complete.

A picture is worth a thousand words.

Ahhhhhhhhhhhh didnt want to hear that will check out local ford dealer and find out thanks guys

buy the bearing for it and it should be self explanitry

Originally Posted by Huk

Ahhhhhhhhhhhh didnt want to hear that will check out local ford dealer and find out thanks guys

And while you are there get your EGR cooler checked and save yourself an expensive unhappy time. I am not enamoured of either our local repairer or protecta warrentys at this time..