Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Alpine Terminator


User Tag List

+ Reply to Thread
Page 1 of 3 123 LastLast
Results 1 to 15 of 33
Like Tree35Likes

Thread: ADVICE NEEDED.....Mitsubishi Triton 2.8 Diesel 2004

  1. #1
    Member
    Join Date
    Aug 2016
    Location
    Gisborne
    Posts
    385

    ADVICE NEEDED.....Mitsubishi Triton 2.8 Diesel 2004

    Hey Guys.....just after some advice / opinions on the Mitsubishi 4x4 Tritons please. I am interested in one (2004) that has had the same owner since 30,000k on the clock and now its got 190,000k, well serviced etc....had a pretty soft life by the looks of things and sounds like a good honest vehicle. Any thoughts would be appreciated and just wondered if they had a good reputation ? Mainly only concerned with common reliability things.......cheers (photo only for reference and is not the actual ute but basically the same, even purple !)
    Attached Images Attached Images  

  2. #2
    Member
    Join Date
    Aug 2016
    Location
    Gisborne Rural
    Posts
    3,362
    @Pete_D have a talk to terry at at gisborne automotives across the road from dave goach spray painters. He is a good guy and owned a few mitsi around that year. Be worth while getting him to have a once over
    Pete_D likes this.

  3. #3
    Cole
    Join Date
    Aug 2019
    Location
    Dannevirke
    Posts
    317
    Good reliable utes, but highly recommend driving one for a reasonable distance before buying. I’m a bigger fulla and the driving position was super uncomfortable for me, knee sort of jammed between the gear lever and steering wheel in 5th gear and not enough room between the clutch pedal and tunnel to get my foot past, especially while wearing work boots. Auto would help but I don’t like autos so didn’t end up buying the triton for that reason.
    Pete_D likes this.

  4. #4
    Member chainsaw's Avatar
    Join Date
    Jul 2014
    Location
    Norf
    Posts
    5,758
    Solid, reliable trucks. Like all diseasals needs regular service and oil change. @Rock river arms hunter has had good run out similar age truck
    Pete_D likes this.

  5. #5
    Member
    Join Date
    Aug 2016
    Location
    Gisborne
    Posts
    385
    Quote Originally Posted by bigbear View Post
    @Pete_D have a talk to terry at at gisborne automotives across the road from dave goach spray painters. He is a good guy and owned a few mitsi around that year. Be worth while getting him to have a once over
    cheers for the heads up mate, unfortunately not a local vehicle but I might have a chat to him.

  6. #6
    Member Sideshow's Avatar
    Join Date
    Apr 2015
    Location
    UK
    Posts
    7,916
    Just upgrading my L200 Warrior of the same year.
    Have had a really good run with mine and the motor is sound.
    Things to look out for. Leaks around the door seals and back window. Also if there is any water in the foot wells. If so this is water increase from the side indicator light where the wire comes through the wheel arch and into the main body. Blub of silicone sorted mine.
    Check the leaf springs are not cracked.
    Check that all grease points have been used. Think there’s 14. Most around the front.
    Check that it’s not crabbing as well as tyre wear on one side. If you run a tape measure from the ground to the top of the front wheel arch on each side you will see if this dose need adjusting.
    I took the cat and egr valve off of mine which really improved its economy. (Not sure if you would get away with this in NZ)
    Find out when the belts where last changed. If they do need doing don’t bother with the balance belts. I didn’t with mine and it’s been five years no issues.
    If you do buy it have a look at this sight for more info. They have a heap of useful info.
    https://www.l200.org.uk/

    Good luck with the sale @PeterD
    veitnamcam, Pete_D and xtightg like this.
    It's all fun and games till Darthvader comes along
    I respect your beliefs but don't impose them on me.

  7. #7
    Member Rock river arms hunter's Avatar
    Join Date
    Mar 2012
    Location
    Deep South
    Posts
    2,203
    I have a 05 2.8TD GLS.

    Reliable?

    Yes very much so. Some will bash them because it's a Mitsi but I've found mine to do everything I need and more.

    Fuel economy- fantastic.

    Grunt- For a 2.8TD it actually has a pair when it counts. It's no petrol but passing on the open road isn't hard!

    I'd buy another
    Pete_D, xtightg and DaScorpi0n like this.

  8. #8
    Member
    Join Date
    Aug 2016
    Location
    Gisborne
    Posts
    385
    Cheers guys, most helpful to a complete non mechanic like myself. Just happy to hear they are not something to avoid for what ever reason and like any older vehicles more dependant on if its been looked after etc. Thanks

  9. #9
    Banned
    Join Date
    Dec 2017
    Location
    The New Progressive non binary Socialist Dystopian Republic
    Posts
    758
    I have had one since 2008 Triton 2.8 td 4x4 purchased it unloved at turners for $15,000 with a hard top.

    Only recurring issues I have had was glow plugs needed a set every year was cheap crap got me some Bosch been in it several years still going strong.

    I have put petrol in it more times than I care to admit stopped when it run bad and drained and fitted new fuel filter seems all good.

    Had a strange ticking noise top end not regular turns out the timing chain was ready to snap, changed timing chain and tensioner at the same time I removed the camshaft and reshimend the valve clearances.

    Put a new battery in it last year first battery it looked like it was the original I replaced !

    Just did an oil and filter change I also changed the front diff oil and will change the LSD rear diff oil tomorrow.

    I change the gearbox its manual transfer box and diff oils every couple of years or so and the diffs after deep river crossings.

    I also had to change the universal joints on the propshaft and usual front disk pads once.

    Had to change the anti roll bar bushes which I upgraded to the fancy orange ones.

    Had the injectors checked when I did the timing chain all was well, I change the fuel filter every couple of years or when I put petrol in it.

    The Tritons been through some rough terrain and deep river crossings which stuffed the auto box in my mates same truck petrol, water got into the auto my manual was fine ?

    Wheel bearings hate deep water started using a thick oily stuff instead of wheel bearing grease so far so good'

    Removed the EGR valve made a difference.

    Replaced a plastic bush the bottom of the gear stick so it was less like stirring porridge changing gear.

    The odd steering linkages.

    My opinion was and is a great ute hopefully good for an other 300,000 k
    Last edited by xtightg; 04-03-2020 at 11:36 PM.

  10. #10
    Member Sideshow's Avatar
    Join Date
    Apr 2015
    Location
    UK
    Posts
    7,916
    How did you get on at the WOF with no EGR valve @xtightg ?
    It's all fun and games till Darthvader comes along
    I respect your beliefs but don't impose them on me.

  11. #11
    Banned
    Join Date
    Jun 2015
    Location
    christchurch
    Posts
    17,992
    you dont need to remove or block the egr, if you confuse then engine management that its cold outside it will switch off automatically. did it to our triton and works a treat

  12. #12
    Member
    Join Date
    Jan 2018
    Location
    kaiapoi
    Posts
    7,120
    Completely removed egr on my 94 pajero.
    Passed about 5 warrants. 2.8 diesel
    They dont seem to care. First couple I had blocked it off with some sheet metal so you couldn't see it. Also found that the previous owner had blocked off the vac line to stop it working. This was to stop black smoke at times but was actually the wastegate letting go way. Only getting 4 psi max before letting go. Adjusted that up to 15psi and that problem went away

  13. #13
    Member Rock river arms hunter's Avatar
    Join Date
    Mar 2012
    Location
    Deep South
    Posts
    2,203
    Can someone please enlighten me with what the EGR is?

    And what removing it does?

    Cheers folks

  14. #14
    Cole
    Join Date
    Aug 2019
    Location
    Dannevirke
    Posts
    317
    Exhaust gas recirculation. Emissions crap, makes the engine eat it’s own shit.

  15. #15
    Member Sideshow's Avatar
    Join Date
    Apr 2015
    Location
    UK
    Posts
    7,916
    As the other two posts said......end result is that it clogs and makes your fuel economy worse than without it...anyway I took mine totally off. Worked a treat and really gave it more life in the acceleration department as well as improved my fuel bill, as in it lowered it.
    Good trucks and fairly easy to work on.
    Pete_D likes this.
    It's all fun and games till Darthvader comes along
    I respect your beliefs but don't impose them on me.

 

 

Similar Threads

  1. Help Needed - diesel mechanic advice
    By Dorkus in forum Outdoor Transport
    Replies: 36
    Last Post: 01-01-2020, 10:43 PM
  2. Mitsubishi triton
    By ocean-hunter in forum Hunting
    Replies: 5
    Last Post: 02-11-2019, 08:10 AM
  3. Mitsubishi Triton?
    By Hunty1 in forum Outdoor Transport
    Replies: 19
    Last Post: 25-11-2013, 03:35 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!