Thread: Advice on a two wheeler

+1 as beetroot says crf230 or ttr230 you would need to spend at least 3k to get a decent one. Trying to double someone especially with gear as well would be a shit show

Now my 5 cents worth . The Honda xr190 is a popular machine for farm type duties and seem to have minimal issues ( if looked after- like any machine) and if considering buying new come with a free farm kit that includes lower gearing , handle bar protection and racks .
Bare in mind I work for Honda though .... so could be considered biased but have sold tons of them and rarely see them back in w/shop for problem fixing .

Think i posted this before but anyhoo,.. this is for hauling my ct90, made mostly from angle. a box weld either side of tow bar and carrier slides in and held in place with a pin in each side. made up a bracket that goes from wheel carrier and clamps around down tube on bike. i have to take plastic cover off down tube on bike first. I didn,t fancy the carriers that just have the center on the hitch as they let the bike flop and flex to much. the two white lines are where i am going to put braces to stiffen the front tie down and slot in the front wheel. Also need to make up a ramp as only used a bit of board.