Thread: Advice on a two wheeler

Think i posted this before but anyhoo,.. this is for hauling my ct90, made mostly from angle. a box weld either side of tow bar and carrier slides in and held in place with a pin in each side. made up a bracket that goes from wheel carrier and clamps around down tube on bike. i have to take plastic cover off down tube on bike first. I didn,t fancy the carriers that just have the center on the hitch as they let the bike flop and flex to much. the two white lines are where i am going to put braces to stiffen the front tie down and slot in the front wheel. Also need to make up a ramp as only used a bit of board.