Holed my boat yesterday on a rock while hunting . Any one alloy weld in canterbury ? http://img.tapatalk.com/d/14/04/14/qaga2a6e.jpg
Printable View
Holed my boat yesterday on a rock while hunting . Any one alloy weld in canterbury ? http://img.tapatalk.com/d/14/04/14/qaga2a6e.jpg
The wood is our" bush repair " ! Worked as we didn't sink .
Ring Ullrich in CHC they will be able to tell you who can do it.
Rough bugger! :D Howd ya go?
7 deer seen 4 stags up close but nothing worth shooting . Biggest we seen was an 8 . Stags where only moaning . Hard to tell but probably have been a bit late . Only manage one day on the tops as weather was foggy and rainy but still as . Rest of time was bush hunting http://img.tapatalk.com/d/14/04/14/udapadah.jpg
Jet Boat Base would probably do it for you.
Ill sort it if your up this way
It's a small job of putting another foot on the length and a simple hard top , see you on Friday cam ha ha ! And the hole
Throw a couple of tubes of "Selleys Knead It, Epoxy Putty" in the boat, just in case for next time
http://www.selleys.co.nz/putty/epoxy/knead-it-steel/
Used that in summer Mikee, its good shit eh
It's going to be put in with my boat safety gear
Mikee to be totally honest , it was not poor navigation, it was not poor mooring ! . I'm kicking myself . Didn't pull boat up far enough lake edge and didn't pay attention too a rock about a meter away . Weather changed for the worse , waves moved the boat onto the rock and boat sunk ! . Was lucky I had a winch in the boat to pull her out . It was put in there in the first place to pull it up the beach to avoid this type of incident . Too much haste not enough thought :pissed off:
Bugger, you should have been onto that after seeing how my puddle can change!