Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Search Forums

Advanced Search
DPT Terminator


User Tag List

Results 1 to 15 of 382
Like Tree202Likes

Thread: BJ73 Landcruiser

Threaded View

gimp BJ73 Landcruiser 13-12-2015, 10:36 AM
MassiveAttack If you are going to do the... 14-12-2015, 11:02 AM
gimp Cheers Is a 3B grunty... 14-12-2015, 11:10 AM
MSL The 33's will suck the life... 14-12-2015, 03:22 PM
gimp That's good data but a shame 14-12-2015, 04:00 PM
Timmay You have 8"? Diffs? You will... 14-12-2015, 06:06 PM
gimp Middy. I think the BJ73 has 8... 14-12-2015, 06:13 PM
mickey you probably have the bigger... 16-12-2015, 09:57 PM
MassiveAttack Within the 8 inch diff there... 15-12-2015, 03:15 PM
distant stalker New truck seems a pretty... 16-12-2015, 10:10 PM
gimp I always wanted a... 17-12-2015, 06:59 AM
Roddy You will fine with 33's, yes... 17-12-2015, 09:14 AM
gimp This thing is not getting 33s... 21-12-2015, 08:31 AM
MassiveAttack I higher gear ratio will make... 21-12-2015, 02:13 PM
jakewire Trucking well is it? 21-12-2015, 10:39 AM
MSL Haha, already gutless on 31's? 21-12-2015, 12:29 PM
gimp Nah goes hard. Desperately... 21-12-2015, 12:37 PM
gimp hmm. clearly I need to borrow... 21-12-2015, 02:21 PM
gimp How hard is it to get the... 22-12-2015, 09:16 AM
MassiveAttack On the one hand it's not hard... 22-12-2015, 09:27 AM
gimp How'd you lift the body off?... 22-12-2015, 09:30 AM
MassiveAttack I never took the body tub... 22-12-2015, 03:56 PM
veitnamcam Nice day at Rotoiti by the... 22-12-2015, 03:20 PM
gimp Sunny as, my right arm got... 22-12-2015, 03:49 PM
gimp Rust! What should I do to... 24-12-2015, 12:59 PM
keneff Have found "Rustroy" to be... 17-09-2016, 11:14 PM
veitnamcam I would knock off anyloose... 24-12-2015, 03:20 PM
JoshC Black magic has been the best... 24-12-2015, 06:17 PM
madjon_ Have a good look under that... 24-12-2015, 07:12 PM
gimp What for? Rust? 24-12-2015, 07:58 PM
veitnamcam And cracks, tho that is more... 24-12-2015, 08:19 PM
veitnamcam Note that for a rust... 24-12-2015, 08:23 PM
longrange308 For a start that ain't rust... 24-12-2015, 09:03 PM
gimp I'd like to get on top of it... 24-12-2015, 10:21 PM
gimp Got a bit of an oil leak from... 26-12-2015, 06:55 PM
gimp Cleaned up a bit this arvo... 27-12-2015, 03:31 PM
gimp http://i58.photobucket.com/alb... 27-12-2015, 05:11 PM
Beaker Section of tin can (watties... 27-12-2015, 08:40 PM
gimp That was the basic plan, good... 27-12-2015, 08:54 PM
gimp Did a bit of work with the... 31-12-2015, 09:25 PM
longrange308 Coast wof man, clearly a farm... 31-12-2015, 09:50 PM
gimp I figured I may as well... 31-12-2015, 10:06 PM
7mmsaum Depends on the build price 31-12-2015, 10:08 PM
gimp What would a build price be... 01-01-2016, 07:28 PM
longrange308 dam i need to get my boat done 01-01-2016, 08:05 PM
R93 You will get a boat there but... 01-01-2016, 08:52 PM
longrange308 It's only a little... 01-01-2016, 09:53 PM
R93 So was mine😆 Sent from my... 01-01-2016, 10:35 PM
gimp ...was? 01-01-2016, 10:48 PM
R93 I made it back to the trailer... 01-01-2016, 10:52 PM
gimp Got bored after work so I... 06-01-2016, 07:17 PM
Wildman Prefect use for plot sheets,... 06-01-2016, 10:01 PM
Beaker Glad wrap also works... And... 06-01-2016, 10:04 PM
gimp Is fish oil good or a waste... 08-01-2016, 10:27 AM
veitnamcam Park it in the river mouth... 08-01-2016, 08:31 PM
MSL Doesn't last that long 08-01-2016, 02:22 PM
Happy Heres your two best new... 08-01-2016, 05:14 PM
chrome Nice zuki mate Sent from... 08-01-2016, 05:35 PM
Happy Thanks only prob now the big... 08-01-2016, 06:02 PM
chrome Chuck a big block g16 under... 08-01-2016, 06:06 PM
jakewire I put that fish oil stuff on... 08-01-2016, 08:42 PM
Pointer Fish oil is pretty good, I... 08-01-2016, 08:54 PM
MassiveAttack You can make your own kit for... 09-01-2016, 03:20 PM
gimp Also have a real sag from... 16-01-2016, 04:25 PM
gimp a couple of weeks later... 16-01-2016, 04:24 PM
MassiveAttack I agree with Tussock. There... 17-01-2016, 06:00 AM
gimp Yeah I did the pinion seal,... 17-01-2016, 08:04 AM
longrange308 Is the breather blocked? Or... 21-01-2016, 09:34 PM
MassiveAttack Heating and cooling it is the... 22-01-2016, 08:21 AM
rupert re rust in the body. Has... 21-01-2016, 08:34 PM
Dan88 you can buy a whole... 21-01-2016, 08:49 PM
gimp Does anyone have the faintest... 28-01-2016, 08:42 PM
Mathias 15x8 -19 offset is what I put... 29-01-2016, 07:52 AM
MassiveAttack +1 what Mathias said. You... 29-01-2016, 09:10 AM
gimp Tyres for 16" rims seem to... 29-01-2016, 09:26 AM
gadgetman It was cheaper for me to... 29-01-2016, 05:02 PM
gimp Picked up the truck today... 08-03-2016, 04:42 PM
MassiveAttack You are now lacking a picnic... 08-03-2016, 04:45 PM
gimp True, that is one downside.... 08-03-2016, 04:55 PM
199p Just chuck the plate inside... 08-03-2016, 05:27 PM
Sideshow If you do that make sure you... 08-03-2016, 08:58 PM
gimp Sorted my dual stereo/no... 09-03-2016, 04:55 PM
jakewire now I can see it. 09-03-2016, 07:21 PM
Chop3r Time you mowed the lawns Pete 10-03-2016, 11:17 AM
gimp Got a LED dome light... 19-03-2016, 03:05 PM
Wildman Cant be worse than the old... 19-03-2016, 03:19 PM
gimp Yeah but I can find my keys... 19-03-2016, 03:22 PM
Timmay gimp, one thing to look at is... 19-03-2016, 04:06 PM
gimp I'll have a look at that,... 20-03-2016, 11:10 AM
gimp D'you reckon this is normal... 28-03-2016, 08:52 AM
madjon_ NO!:o 28-03-2016, 08:55 AM
gimp Me too. Dangit 28-03-2016, 09:26 AM
veitnamcam Yea its a bit worn alright,... 28-03-2016, 02:14 PM
gimp Where would I get parts in... 17-04-2016, 05:07 PM
madjon_ Ain't old Toyotas fun:D... 17-04-2016, 05:20 PM
gimp I'm thoroughly enjoying how... 17-04-2016, 05:23 PM
MassiveAttack Thats the one. Don't break... 30-05-2016, 06:57 PM
gimp I tried the cutting a slot... 30-05-2016, 08:07 PM
MassiveAttack The ez outs are hardened... 30-05-2016, 09:14 PM
gadgetman Unless you know how to do it. 01-06-2016, 05:27 PM
Sideshow Your getting there though:)... 17-04-2016, 09:19 PM
gimp Does anywhere in NZ sell... 18-04-2016, 01:17 PM
Wildman Have you looked in Australia?... 18-04-2016, 01:19 PM
MassiveAttack It's been years since I... 30-05-2016, 06:59 PM
gimp Cheers Booster appears... 30-05-2016, 08:09 PM
gimp I found a source for Genuine... 24-04-2016, 02:47 PM
gimp Got my clutch sorted at the... 24-05-2016, 08:54 PM
gimp Went to Macetown today.... 29-05-2016, 08:02 PM
longrange308 Light on dash and hard pedal... 29-05-2016, 08:22 PM
gimp Thanks, will look at/replace... 30-05-2016, 12:24 PM
gimp The Fix ... 30-05-2016, 06:50 PM
gimp Spent the morning mucking... 05-06-2016, 03:54 PM
p0stal b0b Hey Gimp, nice write-up,... 11-06-2016, 11:51 AM
gimp They're rad. Get a BJ74 or... 11-06-2016, 06:30 PM
p0stal b0b Great info, cheers. I'll look... 11-06-2016, 07:49 PM
Chilli_Dog How accurate is your millage?... 14-06-2016, 02:02 PM
gimp It's accurate. It's a... 17-06-2016, 07:27 PM
gimp My old Rocky was cool ... 11-06-2016, 06:42 PM
Timmay fix ya pics :P 11-06-2016, 06:44 PM
gimp way ahead of you 11-06-2016, 06:45 PM
striker is it 24v? it could be a... 11-06-2016, 06:50 PM
gimp Yeah the truck is 24V ... 11-06-2016, 07:07 PM
Mathias Also a heap or relays in that... 11-06-2016, 07:50 PM
gimp Yeah I didn't think all those... 11-06-2016, 08:11 PM
gimp Turns out it is a voltage... 12-06-2016, 04:05 PM
MassiveAttack If you have a windscreen leek... 14-06-2016, 05:03 PM
gimp I absolutely have rust in my... 17-06-2016, 06:50 PM
rupert I also have a leak around the... 14-06-2016, 08:53 PM
gimp Fibreglass Replacement Panels... 17-06-2016, 06:50 PM
Beaker I'll bring it from Brisbane... 17-06-2016, 06:54 PM
gimp Cheers for the offer - that'd... 17-06-2016, 07:09 PM
Beaker Well let me know when your... 17-06-2016, 07:12 PM
gimp Cheers, will do. 17-06-2016, 07:14 PM
Sideshow Gimp strange question but who... 17-06-2016, 07:28 PM
gimp I don't have a page eight, so... 17-06-2016, 07:33 PM
223nut Sideshow, i see what you mean... 17-06-2016, 07:36 PM
madjon_ 50723 Weird. 17-06-2016, 07:40 PM
gimp oh yeah that's my flatmate... 17-06-2016, 07:43 PM
madjon_ How bout full moon?:) 17-06-2016, 07:45 PM
gimp Picked up 4 factory Prado... 18-06-2016, 07:29 PM
gadgetman You change much more of that... 19-06-2016, 09:24 PM
gimp I GOT A BOX ... 24-06-2016, 07:19 PM
Chop3r You lucky man Gimp. I have... 24-06-2016, 07:32 PM
Sideshow Yes, next you will be in the... 24-06-2016, 07:59 PM
jakewire It'll be a flying brick... 24-06-2016, 09:15 PM
Wildman Can we call it the corelokt?... 24-06-2016, 09:20 PM
gimp Shit BC but better mileage... 24-06-2016, 09:23 PM
Wildman And you're not paying for gas... 24-06-2016, 09:23 PM
gimp No, so of course I make every... 24-06-2016, 09:45 PM
gimp Not a chance, but I... 24-06-2016, 09:20 PM
jakewire looks like a musical... 24-06-2016, 09:47 PM
norsk No.Its an Artistic model of a... 25-06-2016, 04:27 AM
Timmay Ive got a low boost circa... 24-06-2016, 11:07 PM
MSL It's the key to the money pit 25-06-2016, 09:41 PM
gimp It turns out I bought the... 03-07-2016, 10:17 PM
Wildman You needed the sunny climate... 03-07-2016, 10:23 PM
gimp Well I was told "Buy a T25"... 03-07-2016, 10:26 PM
gimp but I did jump further into... 03-07-2016, 10:29 PM
7mmsaum You can design your exhaust... 03-07-2016, 10:35 PM
longrange308 I'm crossing my fingers that... 03-07-2016, 11:20 PM
gimp Had a problem with my intake... 28-07-2016, 04:02 PM
Mathias Hope that new bit of pipe is... 28-07-2016, 04:38 PM
gimp Good point. Hopefully... 28-07-2016, 05:53 PM
gimp New shoes. 10R15 Dueler ATs,... 02-08-2016, 05:45 PM
Tahr I'm enjoying this thread... 02-08-2016, 07:01 PM
veitnamcam Whens the turbo going on... 02-08-2016, 07:59 PM
gimp Over summer sometime, I'm... 02-08-2016, 08:14 PM
longrange308 When I get leaking primers I... 02-08-2016, 08:39 PM
gimp downstream of the filter?... 02-08-2016, 08:49 PM
longrange308 Cheap as too 02-08-2016, 08:52 PM
longrange308 Between pump and filter ... 02-08-2016, 08:52 PM
gimp Yup that's what I meant.... 02-08-2016, 08:56 PM
veitnamcam isnt that just letting air in... 02-08-2016, 08:59 PM
longrange308 Yeah better to do a new... 02-08-2016, 09:13 PM
longrange308 Yeah better to do a new... 02-08-2016, 09:21 PM
norsk From memory the hand primer... 03-08-2016, 03:14 AM
Dr. Watson Hmmm just a note. That T28... 03-08-2016, 06:02 AM
gimp I'm advised that it's too... 03-08-2016, 09:59 AM
gimp So the replacement fuel... 13-08-2016, 12:51 PM
7mmsaum Fit an elec pump to increase... 13-08-2016, 02:23 PM
223nut And the chassis will be the... 14-08-2016, 06:08 PM
Markgibsonr25 Diesel bros nz division 14-08-2016, 06:45 PM
gimp I've found something I think... 15-08-2016, 08:38 AM
7mmsaum You can buy diesel fuel hand... 16-08-2016, 08:41 AM
gimp I got bored and got the angle... 27-08-2016, 01:26 PM
Wildman So does it just sit flatter... 27-08-2016, 02:59 PM
Timmay The picnic table was a good... 27-08-2016, 03:09 PM
gimp Yeah it sticks out like 4... 27-08-2016, 04:27 PM
gimp Cheers but I think I'm cool... 28-08-2016, 05:12 PM
gimp You should be able to get one... 28-08-2016, 05:13 PM
gimp Get your landcruiser working... 28-08-2016, 05:16 PM
gimp Oh I mean the fuel filter... 28-08-2016, 05:42 PM
gimp I have the same thing. Except... 17-09-2016, 03:39 PM
Bonecrusher [QUOTE=gimp;516277]I have the... 23-09-2016, 07:05 AM
gimp I did the unthinkable and... 23-09-2016, 08:46 AM
veitnamcam A breeding pair! 17-09-2016, 04:56 PM
Timmay TBH though, you need two just... 17-09-2016, 05:08 PM
ROKTOY Not Wrong 17-09-2016, 05:18 PM
gimp The new one belongs to my... 17-09-2016, 05:16 PM
Timmay "Dave" 17-09-2016, 05:25 PM
madjon_ 55825 17-09-2016, 06:26 PM
gimp My injector pump is seriously... 22-09-2016, 08:14 PM
Timmay Haha yep, old girls are long... 22-09-2016, 08:18 PM
gimp Will have to look at it next... 22-09-2016, 08:29 PM
veitnamcam If it is the seal where the... 22-09-2016, 08:57 PM
Smiddy Super Gimp Power Sent... 22-09-2016, 09:19 PM
gimp Ah ha 23-09-2016, 08:45 AM
MassiveAttack Re the transfer case. I have... 23-09-2016, 09:16 AM
gimp ^^ I shall consider it,... 27-10-2016, 12:16 PM
gimp Starts like magic after... 06-11-2016, 12:07 PM
7mmsaum Quite normal 06-11-2016, 02:48 PM
erniec My 40 series is the same. I... 06-11-2016, 06:31 PM
gimp Installed an ARB winchbar... 10-11-2016, 07:07 PM
gimp Quality P.O. electrical work:... 10-11-2016, 07:10 PM
MassiveAttack Personally I wouldn't remove... 10-11-2016, 08:29 PM
Ryan I like the how the skyline is... 10-11-2016, 08:42 PM
Nibblet I'm with massive attack, I... 10-11-2016, 08:58 PM
veitnamcam I would rebuild the pto... 10-11-2016, 09:24 PM
ROKTOY I'd have to agree with the... 10-11-2016, 09:31 PM
gimp It doesn't really run fine,... 10-11-2016, 10:17 PM
MSL I'd just take it off and fit... 10-11-2016, 10:19 PM
gimp Plan is to fit an electric,... 10-11-2016, 10:25 PM
ROKTOY Only downside to having an... 10-11-2016, 11:41 PM
Sideshow gimp looks like that Hi-Lift... 11-11-2016, 06:20 AM
gimp Yeah that's half why I keep... 11-11-2016, 09:22 AM
Nibblet Those tifor winches work but... 11-11-2016, 10:14 AM
MSL I use mine to pull trees,... 11-11-2016, 10:34 AM
Gibo I enjoyed that story around... 11-11-2016, 12:39 PM
gimp Desert Duellers are... 11-11-2016, 08:02 PM
Tahr Great pic. 11-11-2016, 08:16 PM
Smiddy How many deer did you get up... 12-11-2016, 05:36 PM
gimp None, just went for a drive... 26-11-2016, 02:34 PM
veitnamcam Has it always smoked or just... 26-11-2016, 03:16 PM
Wildman Most new tyres are though 11-11-2016, 08:05 PM
gimp True enough. They're not a... 11-11-2016, 08:11 PM
veitnamcam Wheres the mud? 11-11-2016, 08:12 PM
gimp [not pictured] 11-11-2016, 08:13 PM
veitnamcam Needs citation. 11-11-2016, 08:14 PM
madjon_ 58743 A represntable... 11-11-2016, 08:17 PM
gimp Hey what do you know, playing... 26-11-2016, 06:50 PM
7mmsaum That's good gimp, Now you... 26-11-2016, 07:07 PM
gimp my fuel economy seems to be... 28-11-2016, 10:33 PM
gimp I went for a drive yesterday,... 30-11-2016, 01:46 PM
Martin358 I just bought a mint 70... 01-12-2016, 08:20 PM
gimp Since this is a hunting... 30-11-2016, 01:50 PM
gimp speaking of Corolla panels, I... 30-11-2016, 05:36 PM
Tahr Ominous signs. A family car. 30-11-2016, 07:16 PM
gimp 2 door, and I ripped out the... 30-11-2016, 07:33 PM
Wildman That's to fit the dog in eh... 30-11-2016, 09:33 PM
jakewire And still room for the... 30-11-2016, 09:57 PM
gimp Jesus man that ain't a... 01-12-2016, 09:12 AM
gimp Would let it go for 650.... 01-12-2016, 08:28 PM
Martin358 Carterton, but thats a bit... 02-12-2016, 05:00 PM
gimp "apparently" it's "illegal"... 02-12-2016, 12:24 PM
veitnamcam Dont tell the 1000s of others... 02-12-2016, 01:44 PM
gimp Sway bar is going on for WOF... 02-12-2016, 02:22 PM
gimp Failed WOF on no sway bar,... 02-12-2016, 02:21 PM
gimp Got a new windscreen last... 13-12-2016, 09:55 PM
ROKTOY The hose needs to remain... 13-12-2016, 09:59 PM
gimp Yeah I'm going to run it... 13-12-2016, 10:01 PM
Smiddy How is that hose connected to... 13-12-2016, 11:52 PM
veitnamcam looks like a push lock barb,... 14-12-2016, 12:01 AM
Timmay Gimp just remove one side of... 13-12-2016, 10:15 PM
gimp It turns out it's just a push... 15-12-2016, 01:08 PM
223nut That transfer box is looking... 15-12-2016, 01:19 PM
gimp Today is 1 year since I... 20-12-2016, 04:02 PM
madjon_ Good hose down should get rid... 20-12-2016, 04:28 PM
gimp Yeah that's on the to-do list 20-12-2016, 04:33 PM
Sideshow Used to blow my rads out with... 20-12-2016, 08:59 PM
Nibblet What's the story with the... 21-12-2016, 01:06 PM
Gibo So you can set fire to it and... 21-12-2016, 01:59 PM
Nibblet Is that the best resort when... 21-12-2016, 02:33 PM
Gibo Yes but I've never been one... 21-12-2016, 02:44 PM
Sideshow If you have a pin hole leak... 21-12-2016, 09:58 PM
gimp Ugh ... 24-01-2017, 05:18 PM
gadgetman Something is seriously wrong... 24-01-2017, 06:21 PM
veitnamcam Ahh the joys of older... 24-01-2017, 06:08 PM
gimp Legitimate joys of an old... 24-01-2017, 06:20 PM
veitnamcam Yep my take on it is you... 24-01-2017, 07:16 PM
gadgetman The difficulty with a lot of... 24-01-2017, 07:29 PM
gimp Considered hocking everything... 24-01-2017, 09:12 PM
andyanimal31 bloody hell my 1988 d/c 4wd... 24-01-2017, 07:55 PM
veitnamcam Already is. 24-01-2017, 09:04 PM
gimp I got all my lock cylinders... 25-03-2017, 02:41 PM
StrikerNZ That wasn't just a worn key?... 25-03-2017, 02:46 PM
gimp worn key and cylinders. took... 25-03-2017, 02:47 PM
gimp Today I have the flu and... 11-06-2017, 01:13 PM
gimp Also I changed my front... 11-06-2017, 01:20 PM
223nut gimp where did ya get the... 11-06-2017, 06:28 PM
longrange308 Going by the bags,Toyota 11-06-2017, 07:32 PM
gimp Partsouq 11-06-2017, 07:48 PM
ROKTOY Good site for Toyota parts.... 11-06-2017, 08:24 PM
223nut Cheers, have the 1/3 rear... 11-06-2017, 08:33 PM
gimp It made a massive difference,... 12-06-2017, 05:54 PM
Timmay Does your wagon have... 12-06-2017, 06:12 PM
gimp Nah it's stock height. Pretty... 12-06-2017, 06:21 PM
gimp Had a look at my wheel... 14-06-2017, 06:49 PM
Sideshow Whoever was last in the hub... 19-06-2017, 02:23 AM
gadgetman I went to a local garage and... 14-06-2017, 07:43 PM
HILLBILLYHUNTERS Do you have diff breather on... 14-06-2017, 08:55 PM
gimp Yes but it only runs as high... 14-06-2017, 10:38 PM
gimp Cheers - I'm going to stop... 14-06-2017, 10:39 PM
StrikerNZ For the interior dome light... 14-06-2017, 10:50 PM
gimp I replaced my dome light with... 14-06-2017, 10:51 PM
223nut Really need to get onto this... 14-06-2017, 11:03 PM
gadgetman It was hard enough getting... 15-06-2017, 12:18 AM
223nut gimp I'm hi jacking your... 18-06-2017, 11:14 PM
ROKTOY How long since you did an oil... 18-06-2017, 11:46 PM
223nut 15w 40 engine, went in for... 19-06-2017, 12:07 AM
Savage1 I'm no expert, but sounds... 19-06-2017, 08:06 AM
223nut Only happens when in low... 19-06-2017, 11:06 AM
gimp I am having the same thing,... 25-06-2017, 10:37 PM
223nut Suspect my old girl needs new... 25-06-2017, 10:41 PM
Savage1 I doubt it would be related... 20-06-2017, 09:46 AM
223nut It is possible I don't notice... 20-06-2017, 12:47 PM
gimp So I failed WOF on the... 20-06-2017, 10:48 PM
gimp Need to bleed the brakes... 20-06-2017, 10:53 PM
gimp Bled my brakes. Grot ... 23-06-2017, 10:34 PM
Chop3r In thoery you should be... 26-06-2017, 03:01 PM
223nut seriously?!! wow guess i'd... 26-06-2017, 03:50 PM
Mathias Get one of the 1 man bleeding... 26-06-2017, 04:33 PM
gimp In theory it's probably wise,... 26-06-2017, 07:38 PM
Chop3r That would be true Gimp 29-06-2017, 02:45 PM
223nut Yuck, hate to think what mine... 24-06-2017, 08:30 AM
jakewire That looks like that Waikato... 24-06-2017, 02:10 PM
gimp Yeah I didn't realise how... 25-06-2017, 10:47 PM
223nut Yeah and the ruc adds up just... 25-06-2017, 11:34 PM
gimp get bigger tyres, then your... 26-06-2017, 11:53 AM
Timmay If you can, change to the GU... 26-06-2017, 12:08 PM
gimp What's the difference? 26-06-2017, 12:21 PM
Timmay Far superior in its ability... 26-06-2017, 03:38 PM
gimp 71369 I was planning on... 01-07-2017, 01:27 PM
gimp So the Cruiser has this going... 02-07-2017, 10:31 PM
Wildman How do you get into it in... 02-07-2017, 10:41 PM
gimp Carefully 03-07-2017, 08:28 AM
223nut And here was me thinking you... 02-07-2017, 11:16 PM
trooper90 How do you get in and out of... 03-07-2017, 08:25 AM
gadgetman We chewed out a bit more... 03-07-2017, 01:32 PM
gimp I didn't like the tilt door... 03-07-2017, 01:46 PM
gadgetman I agree. They are a pain in... 03-07-2017, 02:23 PM
JoshC Never understood why people... 03-07-2017, 06:07 PM
veitnamcam Minis Morries Austins and... 04-07-2017, 08:50 PM
rambo rem700 Mines the same size. Pain on... 04-07-2017, 07:47 PM
longrange308 I'm still shocked that ply is... 04-07-2017, 07:56 PM
gadgetman Well IPL at Gladstone make... 06-07-2017, 01:11 PM
gimp Did some further... 06-07-2017, 05:57 PM
Wildman Have you got a beer fridge... 06-07-2017, 06:44 PM
gimp The venison and beer fridge... 06-07-2017, 06:45 PM
Wildman That is quite a long way to... 06-07-2017, 06:54 PM
gimp Guaranteed to slow any... 06-07-2017, 08:05 PM
Sideshow Why don't you cut another... 07-07-2017, 06:06 AM
gimp This is another only... 16-07-2017, 06:27 PM
R93 You been busy since i seen ya... 16-07-2017, 08:02 PM
gimp Yeah it's fuckin miserable,... 16-07-2017, 08:22 PM
Wirehunt I thought you'd just tie the... 16-07-2017, 08:33 PM
Sideshow I'd get some more lights in... 16-07-2017, 09:40 PM
gimp More/better lights and a... 16-07-2017, 10:12 PM
gimp I was having some starting... 23-07-2017, 04:45 PM
Sideshow Had the same with my L200... 23-07-2017, 08:39 PM
gimp I put in Tridon brand plugs.... 23-07-2017, 09:57 PM
Sideshow Year the old buy once cry... 23-07-2017, 11:54 PM
Sideshow Mine went from 5 to 8 turns... 24-07-2017, 11:11 AM
Smiddy where have you been getting... 01-08-2017, 09:35 PM
ROKTOY https://partsouq.com/ 01-08-2017, 09:46 PM
superdiver Hey team selling my 70 series... 01-08-2017, 10:42 PM
gimp My drivers door handle had... 20-08-2017, 02:18 PM
gimp Got my injectors rebuilt.... 14-02-2018, 09:25 PM
veitnamcam ah the joys of owning a $wd... 14-02-2018, 09:34 PM
MSL Better economy than my ‘14... 14-02-2018, 09:27 PM
R93 Yeah that pretty good for... 14-02-2018, 09:32 PM
gimp turns out having diffs full... 14-02-2018, 09:35 PM
MSL No extended breathers? 14-02-2018, 09:37 PM
gimp Nah I'm real lazy (it's on my... 14-02-2018, 09:39 PM
veitnamcam As MSL said you need extended... 14-02-2018, 09:46 PM
gimp yah the inner axle seal was... 14-02-2018, 10:04 PM
  1. 29-06-2017, 02:45 PM #11
    Chop3r is offline
    Member
    Join Date
    Nov 2013
    Location
    Waikato
    Posts
    597
    That would be true Gimp
    Reply With Quote Reply With Quote
 

 
« Johnson 130 hp 1997 V4 last of the loopers | Reusing Auto Engines. »

Similar Threads

  1. Landcruiser vx
    By BRADS in forum Outdoor Transport
    Replies: 42
    Last Post: 18-03-2015, 09:19 PM
  2. '85 Landcruiser - Any good?
    By Wildman in forum Outdoor Transport
    Replies: 48
    Last Post: 21-05-2013, 06:23 PM
  3. Landcruiser wanted but which one
    By Munsey in forum Outdoor Transport
    Replies: 15
    Last Post: 05-08-2012, 10:27 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
All times are GMT +13. The time now is 09:12 AM.