It was probably turned up to compensate for sucking air threw the seal, back it off a tiny tiny bit at a time until you just get a light haze.Quote:
Originally Posted by gimp
Printable View
It was probably turned up to compensate for sucking air threw the seal, back it off a tiny tiny bit at a time until you just get a light haze.Quote:
Originally Posted by gimp
Hey what do you know, playing with the fuel screw seems to have fixed it mostly. I guess Miles Toyota turned it up to compensate for the rough idle from the leaking fuel filter primer when I had the IP leak fixed. It still had the factory wire seal on the adjustment screw so I figured it hadn't been touched but backing off a quarter turn significantly reduced smoke with no difference in drivability
That's good gimp,
Now you can tune your throttle feel/power/fuel economy to your own liking.
Don't you just hate that you think your doing the old girl a favour and she consumes more :x_x:
Ha sounds like my wife.Quote:
Originally Posted by Sideshow
Brave man there :ORLY:Quote:
Originally Posted by Martin358
my fuel economy seems to be back to normal with no noticeable smoke under load now.
I went for a drive yesterday, to try shoot a deer. Couldn't walk very far past where I drove to as the river was extremely flooded. Saw an 8 point stag. Didn't shoot it. Noticed a bit of a clunk in the suspension though on the way home.
http://i58.photobucket.com/albums/g2...ps0tmvvnag.jpg
Oh I guess that's not meant to look like that
http://i58.photobucket.com/albums/g2...psdrgwebdq.jpg
Who needs sway bars anyway?
http://i58.photobucket.com/albums/g2...ps3rlu715n.jpg
Also got around to pulling off the PTO drive. Before:
http://i58.photobucket.com/albums/g2...psjl2f429r.jpg
Hey I can see inside my transfer case (and it looks like it's about 1.5 litres low on oil, whoops)
http://i58.photobucket.com/albums/g2...psbbm5k8fq.jpg
http://i58.photobucket.com/albums/g2...psl292rahc.jpg
After. Shiny. Better not leak. Probably need to get some RTV on the gasket at some point
http://i58.photobucket.com/albums/g2...pshw2qqxli.jpg
The problem with removing the PTO drive was that I had a massive gaping hole in my transmission tunnel afterwards
http://i58.photobucket.com/albums/g2...ps6hk4ezzf.jpg
So I got stuck into some CAD. Only scrap sheetmetal I had lying around was a fucked front panel from the Corolla. Perfect, it's supposed to be automotive parts and it's even Toyota OEM
http://i58.photobucket.com/albums/g2...psaglyhvlv.jpg
A squirt of primer, some precisely drilled holes and a bit of vacuum tube as a seal later, almost looks good enough to be hidden under the carpet forever
http://i58.photobucket.com/albums/g2...psc1zapxx7.jpg
Anyone want to buy a lightly used PTO winch setup? It works
Since this is a hunting forum, here is the 8 point stag
Attachment 59914
speaking of Corolla panels, I put it back together too
http://i58.photobucket.com/albums/g2...psocdczp4t.jpg
Ominous signs. A family car.Quote:
Originally Posted by gimp
2 door, and I ripped out the back seats...Quote:
Originally Posted by Tahr
That's to fit the dog in eh...Quote:
Originally Posted by gimp
And still room for the bassinetQuote:
Originally Posted by Wildman
