Thread: flat tyre quad bike

Originally Posted by bigbear

Here you go has every think you need https://www.trademe.co.nz/motors/mot...2590482328.htm
Thats the type of repair kit i was talking about with out the gas etc, they are called strings if you look on TM there are a few different options. tyres must be tubeless

I have a similar kit.

I recommend that you look at buying a shut off valve for the co2 cylinders. Most kits only come with a canister punching hose, and once it is punchered it discharges the full canister whether you want it or not, and regardless of whether your hose is connected to the tyre valve. At lease with the control valve, you can inflate it as you see fit, check pressure and have another go. Get extra canisters as well as most of these are designed for two wheel bikes that don't have the tyre volume of a quad, but the quad only needs 3-4psi.
The canister valve is the thing in the middle of the second photo with the red and orange knobs.






I did a bit of research on puncher proofing and concluded that the best on the market at the time was Lifeguard Tyre Guardian. At the time I hade to import it out of the USA but I see it is now available in NZ - https://www.atvlifeguard.co.nz/produ...L-Tyre-Sealant