Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT Ammo Direct


User Tag List

+ Reply to Thread
Page 2 of 6 FirstFirst 123456 LastLast
Results 16 to 30 of 84
Like Tree31Likes

Thread: my poor hot smurf

  1. #16
    Member gadgetman's Avatar
    Join Date
    Jan 2012
    Location
    Christchurch
    Posts
    17,981
    When I had a similar issue I was amazed at the difference topping up the radiator had then running with the heater and fan on full noise had. Brought the temperature down to normal for the run from Whites Bridge over Porters and back home. Stopped a few times to top up on the trip. Wasn't the most peasant trip home with the outside temperature around 30C.
    There are only three types of people in this world. Those that can count, and those that can't!

  2. #17
    Almost literate. veitnamcam's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    24,967
    Quote Originally Posted by gadgetman View Post
    When I had a similar issue I was amazed at the difference topping up the radiator had then running with the heater and fan on full noise had. Brought the temperature down to normal for the run from Whites Bridge over Porters and back home. Stopped a few times to top up on the trip. Wasn't the most peasant trip home with the outside temperature around 30C.
    Yea I had a hondamatic civic, all those early civics had cooling problems and the older they got the worse they got. I used to tow my gpr1300r ski behind it all the way up the lakes. I wired up a manual switch for the cooling fan and any hill was heater on full and rape it in first (only a 2 speed).
    Mind due I always carryed water in that vehicle and I enjoyed the irony of towing 20grand with 400 dollars.
    "Hunting and fishing" fucking over licenced firearms owners since ages ago.

    308Win One chambering to rule them all.

  3. #18
    Member gadgetman's Avatar
    Join Date
    Jan 2012
    Location
    Christchurch
    Posts
    17,981
    Quote Originally Posted by veitnamcam View Post
    Yea I had a hondamatic civic, all those early civics had cooling problems and the older they got the worse they got. I used to tow my gpr1300r ski behind it all the way up the lakes. I wired up a manual switch for the cooling fan and any hill was heater on full and rape it in first (only a 2 speed).
    Mind due I always carryed water in that vehicle and I enjoyed the irony of towing 20grand with 400 dollars.
    The old Toyotas had a good heater, ergo a good secondary engine cooing system. The first things that go in a vehicle are bog roll, jumper leads, tow rope and a bottle of water.
    veitnamcam likes this.
    There are only three types of people in this world. Those that can count, and those that can't!

  4. #19
    Member
    Join Date
    Apr 2012
    Location
    canterbury
    Posts
    1,644
    throw the rad away, you will be super lucky if head not rooted
    kiwijames, kokako and northdude like this.

  5. #20
    dog chaser distant stalker's Avatar
    Join Date
    Dec 2011
    Location
    Chch
    Posts
    2,013
    I would replace the water pump while the radiators out, if it got really hot the seals on that might have had a hard time and it's a quick job while you have a bit of extra space with radiator out. It's about 2.5k (all goin well) to redo the head so money spent protecting cooling is well spent. Replacing water pump and radiator are simple undo, bolt back on jobs

  6. #21
    Member
    Join Date
    Jul 2015
    Location
    Christchurch
    Posts
    58
    Big thanks to @gadgetman for dropping around to have a look see for me.
    So at what point do I know if the head is rooted? Obviously the first step is to replace the radiator. Is there an easy way to work out it out or can the local mechanic check it easily? Or is it a case of waiting for something catastrophic to happen? I'd rather get it fixed before that happens but not if it isn't necessary.

    Cheers

  7. #22
    Almost literate. veitnamcam's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    24,967
    Quote Originally Posted by sheppard84 View Post
    Big thanks to @gadgetman for dropping around to have a look see for me.
    So at what point do I know if the head is rooted? Obviously the first step is to replace the radiator. Is there an easy way to work out it out or can the local mechanic check it easily? Or is it a case of waiting for something catastrophic to happen? I'd rather get it fixed before that happens but not if it isn't necessary.

    Cheers
    "using" water or getting hot even tho the radiator/pump is good are sure signs of head and or gasket problems, I think there is a test mechanics can do these days that is a bit more scientific than looking in the radiator?
    "Hunting and fishing" fucking over licenced firearms owners since ages ago.

    308Win One chambering to rule them all.

  8. #23
    Member gadgetman's Avatar
    Join Date
    Jan 2012
    Location
    Christchurch
    Posts
    17,981
    Quote Originally Posted by veitnamcam View Post
    "using" water or getting hot even tho the radiator/pump is good are sure signs of head and or gasket problems, I think there is a test mechanics can do these days that is a bit more scientific than looking in the radiator?
    @longrange308?
    There are only three types of people in this world. Those that can count, and those that can't!

  9. #24
    Member Tommy's Avatar
    Join Date
    Nov 2014
    Location
    W-BOP
    Posts
    6,536
    TK test

    Reacts to combustion gases in the cooling system (head gasket) but doesn't do diesel engines
    veitnamcam and kokako like this.

  10. #25
    Member
    Join Date
    Jul 2015
    Location
    Christchurch
    Posts
    58
    So, whilst I would love to put in a genuine toyota radiator the price I got from the toyota dealership was an astonishing $1250 with a waiting time of 3 weeks!! When the lovely people at A1 Radiators gave me a price of $320 for a copper/brass aftermarket one which is off the shelf. Will chase up a few other avenues for a toyota radiator but it doesn't seem as though it would be able to come down far enough for me to be able to pay for it (I do realise that the dealers will ream me for it).

    Sooooo, thoughts anyone? Anywhere else to try for a toyota radiator? Are the aftermarket ones worth avoiding?

    Cheers, Rhys

  11. #26
    I hate tacticool Konev's Avatar
    Join Date
    Apr 2012
    Location
    Queenstown
    Posts
    1,128
    if its a automatic keep in mind you may need a trans cooler fitted as well.

  12. #27
    Member gadgetman's Avatar
    Join Date
    Jan 2012
    Location
    Christchurch
    Posts
    17,981
    If it was me I'd stop looking. That is a good price and I doubt the Toyota part would be any better.
    7mmsaum and veitnamcam like this.
    There are only three types of people in this world. Those that can count, and those that can't!

  13. #28
    northdude
    Guest
    try tm there will be new ones on there if you put an alloy plastic one in it completely flush the cooling system you dont want to mix old antifreeze with new stuff it will react and your new radiator will leak within a month and you cant repair it as as said youl be lucky if the head hasn't cracked if you find someone that knows what they are doing the only thing you can do to test the head without taking it off is to do a cylinder leak test cast iron heads don't like getting hot

  14. #29
    Member kokako's Avatar
    Join Date
    Apr 2012
    Location
    Nelson
    Posts
    923
    Quote Originally Posted by northdude View Post
    try tm there will be new ones on there if you put an alloy plastic one in it completely flush the cooling system you dont want to mix old antifreeze with new stuff it will react and your new radiator will leak within a month and you cant repair it as as said youl be lucky if the head hasn't cracked if you find someone that knows what they are doing the only thing you can do to test the head without taking it off is to do a cylinder leak test cast iron heads don't like getting hot
    1KZ-TE has a alloy head. A cylinder leakage test with the cap off should find a leak - it would pay to do two tests, one STONE COLD and one hot.

  15. #30
    dog chaser distant stalker's Avatar
    Join Date
    Dec 2011
    Location
    Chch
    Posts
    2,013
    That price is the cheapest I have seen for a non alloy around town

 

 

Similar Threads

  1. those poor poms
    By gsp follower in forum Game Bird Hunting
    Replies: 7
    Last Post: 19-10-2015, 01:53 PM
  2. Poor bugger
    By rogers.270 in forum Hunting
    Replies: 4
    Last Post: 09-04-2015, 09:03 PM
  3. Very poor shooting
    By 7mmsaum in forum Shooting
    Replies: 57
    Last Post: 13-03-2013, 02:20 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!