Bending a barrel of a rifle?

Printable View

15-01-2021, 10:21 PM
Hawkins

Bending a barrel of a rifle?

Hi!

I have an unusual question. Is it possible to break/bend a barrel of a gun? Crosman Copperhead 4,5 mm to be specific. Why am I asking? Because that is what my friend claims happened to my rifle. He borrowed it for a few days and now won't return it saying that there was an accident and he bent a barrel on mu Crosman. That he dropped it on a tiled floor and the barrel just bent. He said he will have it fixed and then return my gun. I call a sack of bull***t but I want my gun back in ONE piece. So is it possible to bent a barrel of a rifle and if so then how much does a fix or a replacement cost?
15-01-2021, 10:22 PM
Micky Duck

yip they can be bent....dont think just dropping would do it...but stranger things nave happened...
15-01-2021, 10:37 PM
Cordite

Quote:

Originally Posted by Hawkins

Hi!

I have an unusual question. Is it possible to break/bend a barrel of a gun? Crosman Copperhead 4,5 mm to be specific. Why am I asking? Because that is what my friend claims happened to my rifle. He borrowed it for a few days and now won't return it saying that there was an accident and he bent a barrel on mu Crosman. That he dropped it on a tiled floor and the barrel just bent. He said he will have it fixed and then return my gun. I call a sack of bull***t but I want my gun back in ONE piece. So is it possible to bent a barrel of a rifle and if so then how much does a fix or a replacement cost?

Can happen if he dropped it onto something. Do not, Do NOT let your mate try and fix it for you. He is obviously not that careful with your stuff.

In the first instance, all that may have happened is that the point of impact has changed, just adjust the sights.

If it is worse, watch this video. You kind of half disbelieve what you end up seeing, but it's legit:

https://www.youtube.com/watch?v=VB1KfwffqHM
16-01-2021, 07:53 AM
erniec

Bent the barrel of a .22 falling of a farm bike, had it carried across my lap and hit gate post and ended up in a heap.
Old man straightened it don't know how as post incident distance was a key to avoiding more grief.
He had a sawn off single shot that had its barrel bent when a horse rolled on it.
He used it for dog tucker horses and as a kea gun I guess he couldn't straighten that one.
Not accurate looked like a dueling pistol.
The first one mentioned shot ok afterwards mind you open sights and if it hit a rabbit it was all good.
16-01-2021, 09:02 AM
Steve123

Quote:

Originally Posted by hamsav

Im sure that guy didnt have a beard when I started watching the vid . Anyhow I call bullshit too, there's obviously something he doesnt want you to see that may expose the truth. This sort of thing pisses me off ,I would expect my friends to be straight up ,I mean shit happens but if you gotta ly about it you probly shouldnt have been doing what you did to cause the damage. Part of me ( just a wee part )thinks that if you think your mate is capable of skullduggery you probly shouldn't have lent him the rifle in the 1st place , but I also understand it can be hard to say no to a mate that wants to borrow something ,seeking support from ones significant other can be a huge help , in my experiance they are fucking good at telling needy mates to sling it ......well that aint quite right , they are fucking good at telling me to tell him to sling his needy arse in some other direction , thusly my pile of bent chainsaw bars ,broken tilley lamps ,trailers with fucking great holes punched thru the deck ,non returned tools ( not all the same mate ) and near new car with ding in back door ,is only growing slowly. "Friends are your most valuable asset " ah huh

Did he end up straightening it? I gave up watching
16-01-2021, 09:07 AM
canross

Quote:

Originally Posted by Hawkins

Hi!

I have an unusual question. Is it possible to break/bend a barrel of a gun? Crosman Copperhead 4,5 mm to be specific. Why am I asking? Because that is what my friend claims happened to my rifle. He borrowed it for a few days and now won't return it saying that there was an accident and he bent a barrel on mu Crosman. That he dropped it on a tiled floor and the barrel just bent. He said he will have it fixed and then return my gun. I call a sack of bull***t but I want my gun back in ONE piece. So is it possible to bent a barrel of a rifle and if so then how much does a fix or a replacement cost?

Sounds weird. Depending on how much your buddy knows about guns he might have dropped it and moved the sights, or damaged the gun somehow otherwise that changed point of aim/point of impact. I'd say unless it's going to an accredited gunsmith to fix (and not just "my mate who knows how to fix things), don't let him mess with it, odds are he'll only damage it more.

Ask to take a look because it might not be a big issue, and if it's truly broken, ask him to replace it entirely, or send it to crossman's warranty provided for work, at which point they'll either repair it or tell you it's a write-off. What's it worth to you all told? Might just be easier to walk away from it and take it as a learning opportunity that your friend isn't reliable.
16-01-2021, 09:29 AM
Cordite

Quote:

Originally Posted by Steve123

Did he end up straightening it? I gave up watching

I think the video is deliberately long to make sure impatient types don't take on this sort of task... :thumbsup:
16-01-2021, 09:55 AM
northdude

Yep had a chinese shitter air rifle was shooting about a meter off poa at 20m had a bent barrel. First time ive ever sighted a rifle in rifle by bending a barrel.
16-01-2021, 09:56 AM
northdude

Welcome to the forum btw
16-01-2021, 10:27 AM
tiroahunta

Quote:

Originally Posted by northdude

Welcome to the forum btw

At least it wasn’t a selling something or buying something post....[emoji51]

Sent from my iPhone using Tapatalk
16-01-2021, 10:28 AM
huntsika

I had a crossman air rifle as a kid that had a very thin barrel that was a liner floating in a length of thin tube/pipe. It would have been very easy to bend. Your ‘friend’ is still a plonker though.
16-01-2021, 04:20 PM
Jhon

Had a 303 with a bend in the barrel, gunsmith said it was not unusual, and that most chinese sks's had wave forms..you just need the bend to go up and down not side to side or the last few inches to be straight lol
16-01-2021, 05:23 PM
Cordite

Nice English Bullterrier @Hawkins. Yours?
30-01-2021, 07:24 AM
T.FOYE

Airguns have softer barrels. They can easily be bent back with a couple of bits of 4x2. I would say you mate accidentally did a "break barrel dry fire" where the trigger is pulled and you have it open. That flicks the barrel shut with enough force to bend it.
If you dont want to fix it yourself im sure Ron at Youngs can do it no probs. He's servicing an airgun for me at the moment
31-01-2021, 07:45 AM
Happy Jack

No follow up post and the OP appears to be in Germany
31-01-2021, 06:58 PM
Cordite

Quote:

Originally Posted by Happy Jack

No follow up post and the OP appears to be in Germany

Odd, but hey.
31-01-2021, 07:11 PM
rugerman

Yep had a few of those lately. A guy asking about braid on a kontiki and someone else I think. Maybe they forgot what forum they joined and couldn't find it again :wtfsmilie:

Quote:

Originally Posted by Happy Jack

No follow up post and the OP appears to be in Germany
31-01-2021, 10:01 PM
bully

Quote:

Originally Posted by Cordite

Nice English Bullterrier @Hawkins. Yours?

was going to say the same... except drop the English, they are just, bull terrier.
01-02-2021, 01:29 PM
Cordite

Quote:

Originally Posted by bully

was going to say the same... except drop the English, they are just, bull terrier.

Fair comment. I suppose Staffordshire is also still in England.
So we have "Bull terriers" and "Staffordshire bull terriers"? I like the butt ugly charm of the former. They all share that warm clingy personality.
01-02-2021, 04:53 PM
bully

Quote:

Originally Posted by Cordite

Fair comment. I suppose Staffordshire is also still in England.
So we have "Bull terriers" and "Staffordshire bull terriers"? I like the butt ugly charm of the former. They all share that warm clingy personality.

yes, thats correct.
I used to say English bull terrier too. but some time ago was corrected. everyone knows what you mean, but technically wrong. does it matter, probably not. but breeders ect will correct you. great dogs, but you have to be ready for one, they are hard work. I lost mine after 14 years, I couldn't commit to another this time, it didn't feel right. so I now have an American bulldog, im older and slower, so something easier, and thought more of a guard breed in these times we live in.
love the bull breeds.