Thread: Best chainsaw.

Boring with the tip is a good cutting style if you do it right, ebf

Cut the scarf on the downhill side then slice each side of the uphill cut, cut across from the back then bore in through the keyhole and "sweep" it so that it falls

When you see a tree that has been felled this way the whiskers have a stop in the middle

A good technique to use if you are caught with a saw that is shorter than you need

Originally Posted by 308

Boring with the tip is a good cutting style if you do it right, ebf

Cut the scarf on the downhill side then slice each side of the uphill cut, cut across from the back then bore in through the keyhole and "sweep" it so that it falls

When you see a tree that has been felled this way the whiskers have a stop in the middle

A good technique to use if you are caught with a saw that is shorter than you need

Boring with no/overly low depth gauges isnt doing it right unless your doing suicide, on 3/8 pitch chain I definitely wouldnt go lower than 1mm from the tip of the tooth, any further and its not only un safe but a barstard to hang on to and judders and stalls out.