Identify that Knife Sharpener

There are a lot of knife sharpening systems out there. Here is a compilation of most of them that have been mentioned on here over the past eight years - to help make them easier to identify by name and their method of operation. Most manufacturers will make several models, so the ones shown are intended to be *representative* of the style of sharpener only.



Attachment 129871
Attachment 129872
Attachment 129873
Attachment 129874
Attachment 129875
Attachment 129876
Attachment 129877
Attachment 129878
Attachment 129879
Attachment 129880
Attachment 129881
Attachment 129884
Attachment 129882
Attachment 129883

But which ones the best..... cheers for that simplifies things seeing them all together

Quote:

---

Originally Posted by 223nut

But which ones the best..... cheers for that simplifies things seeing them all together

---

This one is best
Attachment 129896
If you can learn to use it

Best depends on your definition. Having tried the Lansky, Warthog and whetstones, I think the Warthog system is the best combination of ease of use and cost. There is a recent thread about them.

I'll be selling my whetstone if anyone is interested.

https://thescullery.co.nz/products/d...tone-1000-3000

No base or blade-angle-keeper as I found them both useless and they went in the bin. Still have the levelling stone. $100 posted.

I hope ya not Puffing too much after putting all that up Puffin :)
Cheers, very handy to see them all next to each other. I usually use a stone, but am thinking about getting a "system" for work, so the rocket scientists I work with at least don't make the knives worse.

the lanksi ceramic rods are sort of like the warthog in that as its shown there is eggzachary how you use them. hold knife vertically correct and draw blade through to keep correct angle..but it LOOKS more like the sharp maker..to taylor made cigarette sized rods poking out of small sanding block sized block of wood,that has holes drilled to correct angles to fit rods into and nifty holes in end with end cap for storage.
cant take photo of it as my daughter has it on loan.

Quote:

---

Originally Posted by mikee

This one is best
Attachment 129896
If you can learn to use it

---

Just ordered these in 6k and 8k to sharpen fine scissors for dressmaking [ my partner who has 3 expensive Juki machines] and trout tying.

I use the warthog for tickle ups and several stones for rough out get back into shape work. My lansky has sat in the drawer for about 20 years.

Really wanna try the scary sharp, but the price puts me off a little.

Quote:

---

Originally Posted by Magnus

Really wanna try the scary sharp, but the price puts me off a little.

---

I really like mine

Sent from my CPH2145 using Tapatalk

You all missed the Russian's
TSPROF. Still available ex Eu or US. But crap the price has jumped since I got mine. Looked at the scary sharp as well but price was an issue as well. The Tsprof is a work of art as well on the bench.
This is the mid range model.

picture size overload

https://tsprof.us/cdn/shop/files/TS-...g?v=1687952946
https://tsprof.us/cdn/shop/files/TS-...g?v=1687952946
https://tsprof.us/cdn/shop/files/TS-...g?v=1687952945

That was the last sharpener pictured in the collection, Tech Studio Profile. Was due for updated images representative of the current model however, so all good.

Quote:

---

Originally Posted by Magnus

Really wanna try the scary sharp, but the price puts me off a little.

---

Just get the eze- sharp, cheaper and better.
Problem solved

Sent from my SM-A226B using Tapatalk

My nephew uses Japanese water stones and they get stuff scary sharp. They're also expensive so I just use whatever stones I pick up from here and there - then I strop them on a leather belt backed onto a 'belt width' board until they're scary sharp. I don't like a little stone, I like them 8 or 10 inches long and I hold them in the bench vice when I'm sharpening the blade.
I take two knives in the bush and the only time I take a sharpening system (slip stone) was when I was possuming, I used a pair of vegetarian or tomato knives for that - and I still have one from over fifty years ago, it was my dad's and I still use it, but there's hardly any blade to it now.

I've never seen those flash ones - not even in a shop.

Ive got a ruixin, anyone know what you use on the stones?

Quote:

---

Originally Posted by blip

Ive got a ruixin, anyone know what you use on the stones?

---

Soapy water, if you haven't already used oil on them.

Once you have written the stones out (you have to flatten them really regularly) buy the diamond stones that got it from AliExpress.

Thanks. I havnt used them yet

Quote:

---

Originally Posted by Vanman

Soapy water, if you haven't already used oil on them.

Once you have written the stones out (you have to flatten them really regularly) buy the diamond stones that got it from AliExpress.

---

if you have already used oil on them...and use dish detergent,the oil will lift out....Ive got some stones and dish detergent is all they have ever known..others get oil.