Thread: Leica and Lackland Service

fucked if i know if its actually called diopter adjustment but its that little + - adjuster thing on each eye hole thing .... not the main focus wheel

A few years ago now, I bought a brand new second hand CRF1200 of TM.

After a few months of using it I found it had a bit of oily metal swarf in it on a lens from manufacture.

I took it to my local sports shop they sent it to Lacklands with a nice note, it went away to Germany & was replaced

Not even sure if it was sold new by Lacklands going by the price I paid for it.

Top service from a top brand

Originally Posted by PerazziSC3

fucked if i know if its actually called diopter adjustment but its that little + - adjuster thing on each eye hole thing .... not the main focus wheel

Can't you close your eye with the working one and adjust center wheel then swap eyes and adjust diaoptr like normal?

Originally Posted by veitnamcam

Can't you close your eye with the working one and adjust center wheel then swap eyes and adjust diaoptr like normal?

errr no, because the right hand side does not adjust, its seized solid so now my right eye is slightly fuzzy and i cant correct it but the left one is sharp as. there is two individual diopter adjusters

Originally Posted by PerazziSC3

Attachment 15344

Nah you're doing it wrong. The RHS Is the focus for the display (RED WHEEL). The LHS is the diopter adjustment.
Cover the LHS objective and focus on an object with the CENTER wheel. Next cover the RHS and look through the LHS. Focus on the exact same spot and adjust till in focus with the WHITE diopter adjustment ring. Now both left and right should be in focus for BINOCULAR vision. This is the same deal for al binos I have had.