Can you insert the new Osram led into an old 2X? If so how much to do it.
Can you insert the new Osram led into an old 2X? If so how much to do it.
Only if you are able to get Maxtoch to send you the correct parts. You'd need the correct size MCPCB and LED gasket/centering ring. If wanting to run the latest Osram chip it would require a new driver board too. Can be done, but need the parts first otherwise it'll be too fiddly.
The driver currently installed is running at 4.2 amps I think, this is enough for the LED in my Osram C8+ V1, and what Maxtoch use in their new models. For the latest Osram LED it requires 8 amps for best performance, this is used in my Osram L21A and C8+ V2. Slightly less range with almost twice the beam width
Bookmarks