Thread: New Leica Rangefinding Binoculars

Originally Posted by 300MAG

Have any of the lucky new HD-B owners tried setting up the SD micro cards yet

Still waiting for mine

Just had a play with load data for my 7mm loaded on the card. Gives corrections out to 925m/1,000y. The display first shows the horizontal range then the correction (in my case clicks). After 925m/1,000y no correction is displayed, just 3 dashes like when no range is read. The range part still displays however. I work in mils and compared to Shooter, the corrections given were either the same, or 0.1 mil less at a few ranges. So based on that, at worst the point of impact would be 9.25cm different (at 925m) assuming that Shooter gives 100% accurate drops. The area I was ranging was slightly below where I was (maybe 2 - 4 degrees angle) so that may also explain the slight variations in the correction given (Shooter was set for 0 degrees).

I think it will be an awesome feature for LR varminting and that's where I'll use it most with my 6X47L