Playing with leather

Printable View

Show 40 post(s) from this thread on one page

28-11-2020, 11:34 AM
HNTMAD

Quote:

Originally Posted by joelhenton

@HNTMAD as requested, here is my first attempt at a 20 round 223 ammo pouch. I'm really pleased with the final result. Thanks for the tips and tricks. I'll be the first to admit it's a total copy of your work. Since I had one to use as a template, may as well start with the best. A complement I hope! [emoji106]

Regards,
Joel

Attachment 154730
Attachment 154731
Attachment 154732

Sheeshz that came out mint, looks fab

Sent from my SM-G960F using Tapatalk
28-11-2020, 12:11 PM
hunter Al.7mm08

Nice work @joelhenton .do you have anything inside the pouch to separate/hold the rounds or are they just sitting in there?

Sent from my SM-G390Y using Tapatalk
28-11-2020, 12:32 PM
joelhenton

1 Attachment(s)

Quote:

Originally Posted by HNTMAD

Sheeshz that came out mint, looks fab

Sent from my SM-G960F using Tapatalk

Thanks Hamish! It's not perfect but I am very happy with it.

@hunter Al.7mm08 I have used a plastic insert from a box of PMC 223. It's the perfect size.

Attachment 154741
28-11-2020, 12:35 PM
HNTMAD

Quote:

Originally Posted by joelhenton

Thanks Hamish! It's not perfect but I am very happy with it. @hunter Al.7mm08 I have used a plastic insert from a box of PMC 223. It's the perfect size.

Attachment 154741

Could prob even look to use thinner leather on the front

Sent from my SM-G960F using Tapatalk
28-11-2020, 12:40 PM
hunter Al.7mm08

Quote:

Originally Posted by joelhenton

Thanks Hamish! It's not perfect but I am very happy with it.

@hunter Al.7mm08 I have used a plastic insert from a box of PMC 223. It's the perfect size.

Attachment 154741

Great minds think alike!.works bloody well alright.I have also used them cut down for smaller pouchs too.https://uploads.tapatalk-cdn.com/202...61795cbbb7.jpg

Sent from my SM-G390Y using Tapatalk
28-11-2020, 12:43 PM
joelhenton

Quote:

Originally Posted by HNTMAD

Could prob even look to use thinner leather on the front

Sent from my SM-G960F using Tapatalk

Yeah it would have no doubt been a bit easier to work with if I had. It's 3mm leather I got from NZ Leather Suppliers. I will make an 8 round pouch for my 7mm-08 when I get some free time.

Thanks,
Joel
28-11-2020, 01:43 PM
joelhenton

1 Attachment(s)

Looks the part next to your pro-grade work Hamish! @HNTMAD

Attachment 154757
28-11-2020, 02:02 PM
Ftx325

Nice work @joelhenton... looks very professional !
You'll be looking for more stuff to make now and before you know it everything will have a leather pouch ... Lol

You been making anything new @hunter Al.7mm08 ?
Expanded any more on the modular theme ?
28-11-2020, 09:57 PM
tiroahunta

Are these any good for any leather smiths out there...??

Old leather cut for reins, never being used. Would need a good oiling.

Could be used as good belt leather..??

PM to discuss if interested...

https://uploads.tapatalk-cdn.com/202...b2056ed745.jpg

Sent from my iPhone using Tapatalk
29-11-2020, 11:33 AM
hunter Al.7mm08

[QUOTE=Ftx325;1091831]Nice work @joelhenton... looks very professional !
You'll be looking for more stuff to make now and before you know it everything will have a leather pouch ... Lol

You been making anything new @hunter Al.7mm08 ?
Expanded any more on the modular theme ?[/QUOTE @Ftx325 have been working on a few things.Had a guy ask me to do a sheath for his custom knife,not the style I normally do but came out ok.Also just finished a sheath for a friends son for xmas,he's a keen pig hunter so I did a bit of carving on that.pretty pleased how that turned out[emoji4]https://uploads.tapatalk-cdn.com/202...65383e6c9c.jpg https://uploads.tapatalk-cdn.com/202...f0f41601aa.jpg

Sent from my SM-G390Y using Tapatalk
29-11-2020, 11:46 AM
ROKTOY

There is some really cool work being shown in this thread.
Keep it going guys.
29-11-2020, 02:48 PM
Ftx325

[QUOTE=hunter Al.7mm08;1092194]

Quote:

Originally Posted by Ftx325

Nice work @joelhenton... looks very professional !
You'll be looking for more stuff to make now and before you know it everything will have a leather pouch ... Lol

You been making anything new @hunter Al.7mm08 ?
Expanded any more on the modular theme ?[/QUOTE @Ftx325 have been working on a few things.Had a guy ask me to do a sheath for his custom knife,not the style I normally do but came out ok.Also just finished a sheath for a friends son for xmas,he's a keen pig hunter so I did a bit of carving on that.pretty pleased how that turned out[emoji4]https://uploads.tapatalk-cdn.com/202...65383e6c9c.jpg https://uploads.tapatalk-cdn.com/202...f0f41601aa.jpg

Sent from my SM-G390Y using Tapatalk

Nice @hunter Al.7mm08....
I like the pig carving , very cool !
11-12-2020, 06:42 PM
hunter Al.7mm08

Got asked to make a pair of sheaths for a friends sons for xmas.Ones a pig hunter the other wants to be a shepherd,thought I'd personalize them a bit.Have covered the initials incase they are members.https://uploads.tapatalk-cdn.com/202...9f976bbefa.jpg

Sent from my SM-G390Y using Tapatalk
11-12-2020, 07:57 PM
Ftx325

More great work there @hunter Al.7mm08 .
You're giving me the itch again but I haven't got bugger all leather left..... doh
Or any knives that need a sheath.....
11-12-2020, 08:14 PM
hunter Al.7mm08

@Ftx325 thanks mate.I'm getting low pn supplies myself.Have been looking at buying more but pricing is a bit scary[emoji27]

Sent from my SM-G390Y using Tapatalk
11-12-2020, 08:30 PM
Ftx325

Exactly my problem. I can't justify the amount of leather I would have to get... think it's something like 6-9 square feet... unless I find a few people who want something made.
Not cheap is it...
11-12-2020, 10:50 PM
ROKTOY

Quote:

Originally Posted by Ftx325

Exactly my problem. I can't justify the amount of leather I would have to get... think it's something like 6-9 square feet... unless I find a few people who want something made.
Not cheap is it...

More hunting, then you can make your own leather..
11-12-2020, 11:55 PM
Ftx325

I just happen to have an attractive goat skin just come out of the tanning bucket....
19-03-2021, 06:25 PM
hunter Al.7mm08

Have just finished this.Bloke wanted a flap over the top and the steel in the front which made fitting the snaps a bit tricky so a modified @Ftx325 design a bit to suit.think it turned out alright.https://uploads.tapatalk-cdn.com/202...c2297d1a72.jpg

Sent from my SM-G390Y using Tapatalk
19-03-2021, 06:29 PM
HNTMAD

That looks mint

Sent from my SM-G960F using Tapatalk
19-03-2021, 06:45 PM
hunter Al.7mm08

Thanks mate.havn't done one like this before so was a bit of trial n error[emoji848]

Sent from my SM-G390Y using Tapatalk
19-03-2021, 07:00 PM
HNTMAD

Quote:

Originally Posted by hunter Al.7mm08

Thanks mate.havn't done one like this before so was a bit of trial n error[emoji848]

Sent from my SM-G390Y using Tapatalk

I really like it, wish I had done similar when I was making them myself

Sent from my SM-G960F using Tapatalk
19-03-2021, 07:03 PM
Ftx325

That looks awesome @hunter Al.7mm08 !
And I'm flattered that you think some of my ideas are worth using... :D
And you are coming along in leaps and bounds in your designs in my humble opinion. Everything you post is even better than the last .
Great work mate , great work !
19-03-2021, 08:06 PM
hunter Al.7mm08

Thanks Ftx.Have to admit the snap problem had me stumped for a while,couldn't come up with a solution I was happy with.Was about to scrap the whole thing n start again,till I remembered your detachable belt loop![emoji362]

Sent from my SM-G390Y using Tapatalk
19-03-2021, 08:21 PM
XR500

Nice solution to an age old problem. Looks good:thumbsup:
19-03-2021, 08:24 PM
HNTMAD

Quote:

Originally Posted by hunter Al.7mm08

Thanks Ftx.Have to admit the snap problem had me stumped for a while,couldn't come up with a solution I was happy with.Was about to scrap the whole thing n start again,till I remembered your detachable belt loop![emoji362]

Sent from my SM-G390Y using Tapatalk

The dome is actually quite simple on a flap top sheath....will try find some photos of what I did to get around it

Sent from my SM-G960F using Tapatalk
19-03-2021, 08:30 PM
HNTMAD

Create a tag off the top of your steel holder, dome.or harness post works easy ashttps://uploads.tapatalk-cdn.com/202...78f323df52.jpg

Sent from my SM-G960F using Tapatalk
19-03-2021, 08:45 PM
Rocco

GOtta have a crack at some of these designs soon, but as said, the old price of Leather is a bit rough at the minute. Any recommendations? Or just keep an eye out for scraps on the yellow site for starters?
19-03-2021, 08:48 PM
hunter Al.7mm08

Thanks @HNTMAD . appreciate that[emoji106]
Something like that definitely could have worked[emoji848]

Sent from my SM-G390Y using Tapatalk
19-03-2021, 09:14 PM
hunter Al.7mm08

Quote:

Originally Posted by Rocco

GOtta have a crack at some of these designs soon, but as said, the old price of Leather is a bit rough at the minute. Any recommendations? Or just keep an eye out for scraps on the yellow site for starters?

There is a big difference between "leather" and "leather",which can make it quite hard to find decent leather outside of a reputable dealer.That said no harm in keeping an eye out,never know what pops up.

Sent from my SM-G390Y using Tapatalk
19-03-2021, 10:11 PM
Ftx325

I'm still itching to make something but I don't have anything that needs leatherwork doing at the moment unfortunately so I am really enjoying your creations @hunter Al.7mm08
Make sure you keep posting your pics mate .
One day I might make a trip up north and we'll have to have that bourbon ....
19-03-2021, 10:26 PM
hunter Al.7mm08

Thanks @Ftx325 .I'll keep a bottle handy.....just in case [emoji1634]

Sent from my SM-G390Y using Tapatalk
20-03-2021, 05:58 AM
Rushy

1 Attachment(s)

Quote:

Originally Posted by Ftx325

I'm still itching to make something but I don't have anything that needs leatherwork doing at the moment.

I could give you a project if only I could find/source a round (think old western) water canteen / bottle inner. I want to get a leather covered water canteen to go with my cowboy action shooting kit.
Attachment 163097
Something like this suitably engraved with Rattlesnake Rushy would fit the bill.
20-03-2021, 06:36 AM
dannyb

Quote:

Originally Posted by Rushy

I could give you a project if only I could find/source a round (think old western) water canteen / bottle inner. I want to get a leather covered water canteen to go with my cowboy action shooting kit.
Attachment 163097
Something like this suitably engraved with Rattles cage Rusty would fit the bill.

Fixed it :thumbsup:
20-03-2021, 06:41 AM
Rushy

Quote:

Originally Posted by dannyb

Fixed it :thumbsup:

Cheeky bugger! Off to work now. Sale day!
20-03-2021, 05:32 PM
ROKTOY

Quote:

Originally Posted by Rushy

I could give you a project if only I could find/source a round (think old western) water canteen / bottle inner. I want to get a leather covered water canteen to go with my cowboy action shooting kit.
Attachment 163097
Something like this suitably engraved with Rattlesnake Rushy would fit the bill.

https://www.trademe.co.nz/sports/cam...263384e4f8-001
21-03-2021, 08:14 AM
Rushy

Quote:

Originally Posted by ROKTOY

https://www.trademe.co.nz/sports/cam...263384e4f8-001

Thanks for this. I will get the missus on to it.
21-03-2021, 08:17 AM
ROKTOY

Quote:

Originally Posted by Rushy

Thanks for this. I will get the missus on to it.

You're welcome

Sent from my SM-G390Y using Tapatalk
22-03-2021, 09:19 AM
S.E.G

Here is three sheaths I finished off in recent weeks, I have always been a fan of pocket sheaths for small fixed blade knives like the ESEE Izula.
https://uploads.tapatalk-cdn.com/202...bf8422d500.jpg
22-03-2021, 10:11 AM
Ftx325

Hi @S.E.G Nice sheaths , but just curious as to why the second one has the extra leather off to the side . Is that what you have called a pocket sheath ? And is the extra width to stop it flopping around in a pocket or just for larger surface area for a belt loop ? Forgive my ignorance but I have not heard that term/description before ......

Show 40 post(s) from this thread on one page