Thread: Scope mounting your Maxtoch torch

Originally Posted by MassiveAttack

I use the same setup as R93. These are the DX links for the bits:
rail thingy

Quick release rings (pair)

In addition to that on my AR I don't use the rail thingy, I use an offset rail mounted just behind the scope ring which brings the torch closer to your thumb for easier turning on\off.

offset rail

The rail thingy for the scope and the scope rings are all 30mm with plastic inserts for 1 inch scopes so you don't scratch your scope (assuming it's 1 inch).

The quick release rings mounts solid and comes on and off with finger pressure.

Can you please put up a pic of what your set up looks like.
Thanks.

For those who want to use a normal ring (Be it weaver or dovetail) and want to turn it into a quick release rather than spend money in a whole new QD ring (there are some that tight, I used to be which is how I figured this wee trick out)

Get the bolt thread size from the ring clamp and replace it with a much longer bolt that has a wing nut wound on backwards. Then simply locktite the bolt in place and use the wing nut to tighten the clamp and release it when you want. Head of the bolt keeps the wing nut from being lost. I am looking for the pitures of the one I had but cannt fint them.

@scottrods I suspect that light is not going to move much under the heavy recoil of that rifle

Extremely useful thread - not only for maxtochs but for other torches.

Wish we could sticky it - would save having to answer alot of questions.

Not a Max,but this works for me.Only have the torch in Aus.

I mount mine on the fore end. I find it balances better and is easier to on/off with the left hand as i only turn it on to take the shot, preferring to use a head lamp for finding the game.

Originally Posted by hotbarrels

I mount mine on the fore end. I find it balances better and is easier to on/off with the left hand as i only turn it on to take the shot, preferring to use a head lamp for finding the game.

Attachment 50773

Would get in the way for me, won't fit in the quad rifle rack if mine was like that.

Originally Posted by hotbarrels

I mount mine on the fore end. I find it balances better and is easier to on/off with the left hand as i only turn it on to take the shot, preferring to use a head lamp for finding the game.

Attachment 50773

I would definitely want a remote switch on that one

@hotbarrels do you find it catching on scrub any more than scope mounted? Quite like the idea of pressing the tailcap switch with free hand, like you I only turn it on when I'm taking a shot

I have been using these for few years - like a number of other people on the Forum.

Very effective on .308 in open ground / paddocks.

Originally Posted by 223nut

@hotbarrels do you find it catching on scrub any more than scope mounted? Quite like the idea of pressing the tailcap switch with free hand, like you I only turn it on when I'm taking a shot

No issues at all. I flick the light on and support the fore end using the body of the light. Couldn't be more natural.

Here are the little rails super cheap:

http://www.aliexpress.com/item/30mm-...9-94bbaaf377c2

Got a couple of those on the way to try out.
The last chinese rail I bolted to my scope scratched the hell out of it, so I run a lapping bar through them first now.
I see these seem to have fabric inserts, so may not cause an issue.

Just had email chat with Amanda and Maxtoch are sourcing and will stock these items - the little picatinny rails and quick release tall rings for them, and also the plastic 8 mount:

http://www.aliexpress.com/item/30mm-...9-94bbaaf377c2

30mm Flashlight Laser Sight Mount Holders for 21mm Rail Gun (Pair) - Free Shipping - DealExtreme

http://www.aliexpress.com/item/Mount...b-308442ff0bc6

No doubt they'll put their seller/freight margin on them, but may still be a quick way for guys to set up.