Jack 3.0
Attachment 270469
Printable View
Jack 3.0
Attachment 270469
Another one done today.
Attachment 270573
Something for cutting carrots and stuff.Attachment 270607
few i finished this weekAttachment 270616Attachment 270617
Attachment 270618one more
Jeez you fellahs have talent.
thats a dang purty knife great shape personally like a bit more finger guard but good to see someone making a knife thats a practical shape as a hunting knifeQuote:
Originally Posted by Nga
looks familiar :yaeh am not durnk:Quote:
Originally Posted by Nga
Attachment 270635
Going Ffg/ full height grind is a great choiceQuote:
Originally Posted by Nga
This is my version of a Ray Mears "woodlore" knife. These are a bushcraft knife, so would normally have a scandi grind, but I did this one as a flat grind since its going to a guy who spends more time taking deer apart than making fire sticks or snares or caving out cups.
The blade is 3.5mm NitroV steel, with a tapered tang. The handle is Gidgee, with brass Loveless bolts and thin red liners. My first time using Loveless bolts, and I used Ubeaut Aussie Oil as the finish on the handle for the first time.
Attachment 270653
Attachment 270654
Attachment 270655
Attachment 270656
Another JACK 3.0, K110 with an ironwood burl handle.
Attachment 271070
Attachment 271071
Quote:
Originally Posted by Nga
Attachment 271336
Yep the revised design works a treat,
Very happy with the performance!
These are a couple of my boner profile. The steel on the camo handle one is the last bit of 2.5mm Elmax steel I had left in the workshop. The orange/black laminate handle is 2.5mm AEB-L steel. Both have a shallow hollow grind with a distal taper to a fine point. The tangs are tapered down to about .5mm, with G10 handles, fine G10 liners and G10 pins.
Attachment 271522
Attachment 271523
Attachment 271524
Attachment 271525
Attachment 271515
Attachment 271517
Attachment 271518
Attachment 271519
some very nice examples of the cutlers art being shown .keep up the great work fellas .
Now selling these for 450 eachQuote:
Originally Posted by Nga
