Thread: show us your chainsaws

Got the seals and gaskets in a blister pack from Terry in Taranaki, aswell as the two bearings. The clutch side bearing was quite different to mine, in that it carried a circlip on the outer case, where the one in the saw relied on a circlip in the case. I didn’t end up using anything other than the head gasket and new piston. Everything else, I decided was actually not bad.

Originally Posted by MSL

Got the seals and gaskets in a blister pack from Terry in Taranaki, aswell as the two bearings. The clutch side bearing was quite different to mine, in that it carried a circlip on the outer case, where the one in the saw relied on a circlip in the case. I didn’t end up using anything other than the head gasket and new piston. Everything else, I decided was actually not bad.

I think there was a change part way through that series. they also have 2 different types of ignition . These guys are good for hard to find Stihl parts if Terry doesn't stock them https://shop.saegenspezi.de/spare-pa.../045-AV-056-AV