When I the Islands I noticed the knot they used to tie the leader to Raparla , involved a loop and several wraps around . End result was the Raparla can move freely , giving more action . Anyone use this ? and How do I go about this
Printable View
When I the Islands I noticed the knot they used to tie the leader to Raparla , involved a loop and several wraps around . End result was the Raparla can move freely , giving more action . Anyone use this ? and How do I go about this
Funny, wonder if its called the Rapala knot? :P
https://www.google.co.nz/search?q=ra...w=1920&bih=971
Yip, works well. I spit on the line so that it tightens up easily without line damage
@Munsey you are going to have abit of time to practise this knot now.
Get a crimping set up bro, you'll need it sooner or later. I crimp everything down to 100lb if its a trace and even then it gets hard tying some knots. I do tie clinch knots on 180 leaders sometimes but its a bit of a knack to get it to lay right and that's only if I'm in a hurry or the crimp gear at available. .
here is a good rapala knot diagram i keep handy on my phone
http://uploads.tapatalk-cdn.com/2016...be9ec9a711.png
can you run me through the crimping please @Gibo ? what to do and what you need. i have crimping pliers for my speargun lines but have never used for fishing leaders
You can get ally or copper?brass crimps from most fishing shops. You just match the crimp to the mono size or copper for steel wire. I crimp starting at one end if the crimp turning it 180 degrees for each crimp to remove crimp curling. I also run the tag end well past the crimp and melt the end flat, then pull it up to the crimp and crimp it. You can also get rubber tube, plastic coated wire tube or ali loops to protect the mono where the loop is.Quote:
Originally Posted by LOC
All for game traces use knots for mainline to swivel etc
ok, thanks for that. similar to my gun line. yesterday rigged a jigging rod with an FG knot to the braid with 130lb around 6m - so would a crimp be a good option for the mono to swivel after that section? then leader / lure etc. cheers
If its for jigging you wont need a swivel just a hearty stainless ring that the assist hook and split ring attach to. Id just do a clinch knot with 8-10 wraps
ok, cheers mate. will look at that. first jigging set up i've had. into it tomorrow for a spear and fish on the northern end of kauwau. fired up!
So pr or fg braid to mono, whatever length trace you want, clinch to ring, add split ring and assist to ring. Then swap jigs by swapping them off the split ring. No need to take split ring off just jig.
Attachment 57643
brilliant, much clearer to see it and looks functional. better grab myself a pair of split ring pliers
Sorry @Gibo. I hate the clinch knot. It is the only knot I have had fail more than once well below the presure I thought it should take (although this may have something to do with the person that tied it). I far prefer the uni knot as it does everything. You can tie it up tight onto something, make a loop, and join lines with it (even mono to braid). And if the mono is heavy (400lb) then the perfection loop is solid and quick to tie. Also I would not use copper crimps on mono as they tend to have sharp edges and can cut into it compared to alloy.
Ive had only a few clinch knots fail but agree with everything else. Ive had a fair few uni knots fail. For a loop i tie a dirty figure 8. Surprisingly strong. Yip copper for steel as i saidQuote:
Originally Posted by Shearer
Figure 8 for a short double? I agree in light line. Like my Bimini twist too. Works well in braid.Quote:
Originally Posted by Gibo
Yeah light line up to 80lb. I make all my dropper rigs with 4 fig 8s. Never had on pop yet. Those dumb dropper knots just pull tight against the hook with a big enough fishQuote:
Originally Posted by Shearer
Im pretty useless with line knots to be fair.
I use a chinch? for onto a swivel or hook in mono/floro and a double overhand knot to make a loop for droppers or sinkers. I havent had success with the uni but clearly I am doing something wrong cos they either break or unravel when I tie them.
Learnt the fg knot a while ago....how much wear before you retie?
I am mostly just a dirty bait fisherman and while I do tie my own ledger rigs etc mostly I just buy black magic ones and curse when a cuda takes a hook off....been burnt by the cheap burnsco/wharyfardy flasher rigs...get a decent snap on and the knot just unravels!
Knot gurus probably curse those swivel clip things but I bloody love them, so quick and easy to swap between setups.
I use swivels on all mono set ups Cam. I use a pr on kingi set up and that knot i drew that picture of for softbait setup. Whats a double overhand look like?
http://uploads.tapatalk-cdn.com/2016...63f57c772e.jpgQuote:
Originally Posted by Gibo
http://uploads.tapatalk-cdn.com/2016...09349161b4.jpg
Sent from my SM-G800Y using Tapatalk
