Thread: New boat incoming

Originally Posted by veitnamcam

Oh and

It now has a pic

Originally Posted by hunter308

It now has a pic
Attachment 66611

Good shit

I am in the starting blocks of building my own dingy, it wont be as pretty as yours but should be just as practical and suit my individual needs better.

Hope to see some fishing reports from you soon

Originally Posted by veitnamcam

Good shit

I am in the starting blocks of building my own dingy, it wont be as pretty as yours but should be just as practical and suit my individual needs better.

Hope to see some fishing reports from you soon

Lets see what happens this weekend, BTW the beam width on this one is 1.83 meters, dead rise is 11 degrees variable, draft 300mm, gunnel height is 550mm (and filled with closed cell foam chips to act like pontoons if the boat ever gets totally swamped), gull wing style hull with medium v and extra wide chines in the transom area and positive bouyancy under the floor if you are looking for some ideas for your dinghy build for extra stability. The live bait tank is passive which means you can leave the drain bung out and the tank will only go up to the waterline of the boat and no more, it has a drain bung each side of the tank and one at the front that you can take out for washing down to get rid of the water from the livie tank you just start the boat and take off once water is gone put bung back in and head for the ramp . The ally is around 3mm thick on this one and there is not one rivet holding things in place it has been fully seam welded all the way around including rod holders